COLOR TV RECEIVER OWNER'S MANUAL Please READ this manual carefully before operating the unit, and keep it for future reference.
* For your enjoyment of this TV set, please read this manual carefully and keep it good for future reference. CONTENTS Before Operation Warning and cautions ............................................................................................2 Installation ..........................................................................................................3 Antenna connection...........................................................................................
Warning and Cautions 1. When you clean the TV set, please pull out the power plug from AC outlet. Don't clean the cabinet and the screen with benzene, petrol and other chemicals. 4. Do not place the TV set near rain or moisture as it may cause an electric shock, or the TV set to catch fire. The TV set must only be used in dry in door locations. 2. In order to prolong the using life of the TV set, please place it in a well ventilated location. 5.
Installation Antenna connection General speaking, to enjoy a clearer picture, we recommend that you use a CATV system or an outdoor antenna .In different places, the suitable antenna type and position are different. 300 twin-lead cable Antenna adapter (additional purchase) Mixer additional purchase 75 coaxial cable Plug (additional purchase) Note Antenna input 75 standard coaxial type AC power socket * the plug type may vary depending on the model.
Position of Buttons and Plug-ins Front and Side panel Side AV terminal USB USB Terminal VIDEO Power switch L AUDIO R Cards Jack Infrared receiver Note: The cabinet and buttons of TV is only for reference.
Function Buttons of the Remote Control Function buttons of the remote control MUTE TV/AV STILL HDM POWER Mute button To eliminate the sound of the programs SCAN CALL/HELP DC standby and power button TV and AV exchange button A changeover between TV and other input signals like AV I/II select button Picture still button Screen call/help button HDM menu button SWAP Program scan button Direct select button Select a TV channel directly S.STD P.
The Screen Display Menu For your convenience of operation, here lists the screen display menus of this model as your reference.
Switch on/ off the TV set In the following, the methods of using power switch and remote control to switch on/off power supply for the TV set will be explained. Switch on/ off the TV set Switch on/ off the TV set 1.Connect the power supply wire. Then press the power switch button, the power indicator will light, in several seconds the picture will display on the screen. 2. If the TV is in the state of standby, press the POWER button or the CH+/- buttons on the remote control. Note: 1.
Watching TV Programs Watching TV programs How to select the TV program Select the desired program 1. Use the direct number selection button Press the button from 0-9 to select a one-figure channel. If you want to select a double figures channel, press the figure-selection button and change it into two-figure mode, then press the number of the channel. If you want to select a three figures channel, press the figure-selection button and change it into three-figure mode, then press the number of the channel.
Watching TV Programs (continued) Swap function enables quick swap to the last watched program. Program swap and auto scan functions Program swap SWAP 1. Suppose the channel number you used just now is 8 and the channel number you are using is 18 (as shown in the figure). 2. If you want to return to the last watched program channel 8, you can simply press the SWAP button. 3. If you want to return to channel 18, press the button again.
Tune The TV set has three methods to set the channels, which are Auto search, Search, Quick Search and Fine tune. In this section, how to use the remote control to set the channel is explained. You can also use the buttons on the TV set to set channel. Auto search Auto search 1. Press the MENU button to display the menu, then press CH+/-buttons to select TUNE menu, press VOL+ button to enter. MENU Picture Exchange Sound Program edit Tune Search Setup Auto Search Timer Quick Search CH+ 2.
Tune (Continued) Search Search 1. Press the CH+/- buttons or Direct select button to select the desired channel number. 2. Press the MENU button to display the menu, then press CH+/-buttons to select TUNE menu, press VOL+ button to enter. CH+ VOL- MENU CH- VOL+ . Press the CH+/- buttons to MENU move the indicator to "Search", Picture Exchange and then press the VOL+ button Sound Program edit Tune Search Setup Auto Search Timer Quick Search to enter the SEARCH menu. 4.
Tune (Continued) Fine Tune and Program Lock functions Fine Tune If the picture and/or sound are poor, try using the FINE TUNE feature. Do not use this feature unless reception is poor. 1. Press the CH+/- buttons or Direct select button to select the desired channel number. ( For example, the channel 1.) CH+ VOL- MENU VOL+ CH- 2. Press the MENU button to display the menu, then press CH+/-buttons to select TUNE menu, press VOL+ button to enter.
Tune (Continued) Skip unnecessary channel Skip unnecessary channel The Program skip feature enables you to skip/hide programs that you do not wish to be displayed when using the CH+/buttons. These channels will still be displayed by directly using the channel number buttons on the remote control. 1. Press the CH+/- buttons or Direct select button to select the desired channel number. ( For example, the channel 1.) CH+ VOL- MENU VOL+ 2.
Tune (Continued) Exchange Programs Exchange Programs This feature enables TV programmes that may be on a wrong program number to be moved to another number. This feature is very useful when Automatic Search Tuning has been used because programmes are stored in the order they are found, which is usually not the desired order. When organising, it is best to start from the lowest programme number first. 1.
Picture Adjusting Select the picture modes and set the picture quality How to select the picture modes You can quickly select the desired picture mode from four preset modes and one customized mode. P.STD Press the P.STD button to select the desired picture quality.
Picture Adjusting (Continued) Filter Function Filter Function PICTURE 1. Press the PICTURE button, the Picture menu will appear on the screen. . Press the CH+/- buttons to move MENU Picture Exchange Sound Program edit Tune Search Setup Auto Search Timer Quick Search the indicator to "Filter". CH+ . Press the VOL+ button to the Filter sub-menu. VOL- MENU CH- VOL+ . Press the CH+/- buttons to select the desired option, then press VOL-/+ buttons to adjust the value.
Picture Adjusting (Continued) 3A Optimize and 3DNR Functions 3A Optimize Function 1. Press the PICTURE button, the Picture menu will appear on the screen. PICTURE MENU Picture Sound . Press the CH+/- buttons to move the indicator to "Advance", then Tune Setup Timer Picture Mode Brightness Contrast Color Hue Sharpness Filter Advance Standard 50 50 50 0 30 press the VOL+ button to submenu. . Press the CH+/- buttons to move CH+ the indicator to "3A Optimize". VOL- MENU VOL+ .
Picture Adjusting (Continued) Comb filter and Layer En./Color En. Functions Comb filter Function 1. Press the PICTURE button, the PICTURE Picture menu will appear on the screen. MENU Picture Sound . Press the CH+/- buttons to move the indicator to "Advance", then Tune Setup Timer Picture Mode Brightness Contrast Color Hue Sharpness Filter Advance Standard 50 50 50 0 30 press the VOL+ button to submenu. . Press the CH+/- buttons to move CH+ the indicator to "Comb filter".
Sound Adjusting Select the sound modes and set the sound quality How to select the sound modes You can quickly select the desired sound mode from three preset modes and one customized mode. Press the S.STD button to select the desired picture quality. Four kinds of sound modes can be selected in turn. S.STD Sound Mode Sound quality Standard Standard News Speech User You can set it by yourself Music Musical Set the sound quality When the User mode is selected, you can customize the sound quality.
Sound Adjusting (Continued) Equalizer and Mute functions Equalizer function SOUND 1. Press the SOUND button, the Sound menu will appear on the screen. MENU Picture . Press the CH+/- buttons to move the indicator to "Equalizer". Sound Tune Setup CH+ Sound Mode 3D MONO SRS Dialog Trubass Balance Equalizer Standard Off Off Off 0 Timer . Press the VOL+ button to subVOL- MENU VOL+ menu. Equalizer . Press the CH+/- buttons to CH- select the desired item. CH+ .
Timer Set Up Function This model has time set function such as On/Off Time, Sleep and Remind Time, etc. The unit of the TIME menu is minute. Set current time and On/Off Time functions Set current time When this function is used, please first check whether the clock is in accordance with your local time; if not, you can follow the instructions to adjust it. TIME 1. Press the TIME button, the Time menu will appear on the screen. MENU .
Timer Set Up Function (Continued) Remind Program Function Remind Program Function With Remind Program function, the TV set can automatically change a preset program in a preset time . 1. Press the TIME button, the Time menu will appear on the screen. TIME MENU Picture Sound Tune Setup Timer CH+ MENU Picture MENU 27 00 00 10 ---Off . Press the CH+/- buttons to move the indicator to " Remind Time ".
Set Up Function Select the menu Language and Screen Saver function How to select the menu Language You may choose Chinese or English. 1. Press the FUNCTION button, the Function menu will appear on the screen. FUNCTION MENU Picture Sound . Press the CH+/- buttons to move the indicator to " Language ", then CH+ Tune Setup Timer Language Screen Saver Curtain Color sys.
Set Up Function (Continued) Select Switch on mode and HDM scan function Select Switch on mode There are some kind of Switch on mode, such as , etc. You can choose one you need. , , FUNCTION 1. Press the FUNCTION button, the Function menu will appear on the screen. MENU Picture Sound Tune Setup CH+ . Press the CH+/- buttons to move VOL- MENU VOL+ Timer Language Screen Saver Curtain Color sys. HDM scan Transparency Tilt English On PAL50 100Hz On 0 the indicator to " Curtain ". .
Set Up Function (Continued) Tilt function and setting Transparency Menu Tilt function When the TV set is affected by the geomagnetism so that the whole picture turn tilt, you can use the function. FUNCTION 1. Press the FUNCTION button, the Function menu will appear on the screen. MENU Picture Sound Tune Setup CH+ . Press the CH+/- buttons to move Timer Language Screen Saver Curtain Color sys. HDM scan Transparency Tilt English On PAL50 100Hz On 0 the indicator to " Tilt ". VOL- MENU VOL+ .
Setting the Lock This TV set provides you with the LOCK function, you can choose it due to your need to protect your TV set. Change your password Change your password This TV set can set a four digit password, the original one is 0000, if you want to reset it, please follow the instructions below. H.LOCK 1. Press the H.LOCK button, then press the Digital number button to input the password, screen will show as the form on the right. Password ---- CH+ VOL- MENU VOL+ .
Setting the Lock (Continued) Setting the Lock Setting the Lock There are Child Lock and Channel lock setting, you can set it due to your need. H.LOCK 1.Press the H.LOCK button, the screen will show as the form on the right. Password ---- CH+ VOL- MENU CH- VOL+ 2.Press the Direct-digit Choosing button 0 for four times( or input the password you set) to enter the Lock Menu. Lock Set Change Password New PWD Confirm PWD Confirm Lock Channel Lock ------Off Off 3.
Others Functions Calendar, Picture Still and Zoom functions Calendar function Note: The calendar can not renew automatically. CAL./EXIT 1. Press the CAL./EXIT button, the Calendar menu will appear on the screen. CH+ Sun Mon Tue Wed Thu Fri . Press the VOL-/+ buttons to move the indicator to the year / the month, VOL- MENU VOL+ and then press the CH+- buttons to adjust the year and the month, to demand the desired date.
Others Functions (Continued) Setting and Using Favorite programs, Setting Sleep Timer Setting Favorite programs After setting the Favorite function, you can select the programs that you favorite. FAVORITE 1. Press the FAVORITE button twice, then the screen displays the Favorite menu. Favorite No . 1 2 3 4 5 6 7 8 2. Press the CH+/- buttons to move the indicator to "NO.1 ". Current Program 2 CH+ VOL- MENU Program 2 3 4 5 6 7 8 VOL+ 3.
Others Functions (Continued) VGA input adjustment Setting the PC software 1.First, click on Settings on the Windows start menu and click on "Control Panel". 2.Double click on the Display icon. 3.Click on the Settings tab on the display dialog-box. 4.Adjust the resolution to 640X480 pixels 5.Click the Advanced button and click the Monitor tab on the dialog-box. Set the vertical-frequency to 60Hz and then click the OK button. 6. Connect the PC to the TV set by the VGA terminal. VGA input adjustment TV/AV 1.
Multi-Media Player System Multi-media player preparation 1. Supported equipment 1)Equipment supporting Mass Storage agreements include USB, mobile hard disk, card reader, some MP3 and digital camera. 2)Equipment supporting PTP agreements include some digital cameras. 2. 1 Supporting media: picture, music, MPEG4, MPEG2 and MPEG1; Supporting file formats *.Avi, *.DIVX, *.MPEG,*.DAT, *.MP3, *.WHA, *.JPG and *.JPEG.
Multi-Media Player System (Continued) Multi-media player preparation 2.Insert the card as right direction. As following Card in common use CF card 2 jack CARD MB 128 5 M EMORY S TICK SM card jack 128 MB 4 jack M ULTIM EDIA C OMPACT F LASH DIGITAL MEMORY CARD 128 3 MS card MMC card jack MB 1 SD jack SD 128MB ID 128MB Note: 1.the card insertion time, after the flows media system starts 2s , insert the card to numerical code card reader , do not bring card to start flow media system. 2.
Multi-Media Player System (Continued) To operate the menu To operate the menu 1. Press the or button to select the item with up or down. AAA Multimedia Player Card USB File copy SETUP Remove USB Press ENTER key to play this devices 2.Press the or button to select the desired item of sub-menu with left or right. 3 Press the button to ensure the desired option, to enter the sub-menu, to resume the speed of standard. 4. Press the or slowly. Press the also.
Multi-Media Player System (Continued) Multi-Media Player To select stream media broadcast system 1.Press the or button to select "card"or "USB". (The device be inserted and identified). AAA Multimedia Player Card USB 2. Press the button to enter selected option. File copy SETUP Remove USB Press ENTER key to play this devices To play picture 1. Press the or button to select Picture item. AAA Multimedia Player Picture 2. Press the button to enter the menu of play.
Multi-Media Player System (Continued) Multi-Media Player To enjoy music 1. Press the or button to select the Music option. AAA Multimedia Player Picture Movie Music Music and PIC 2. Press the button to enter the menu of play. AAA Multimedia Player 3. Press the or button to select the desired music, and then press the button to play. The day went away .MP3 Note: the play file menu are different with your USB device. 4.
Multi-Media Player System (Continued) Multi-Media Player To play Movie 1. Press the or button to select the Movie option. AAA Multimedia Player Picture Movie Music Music and PIC 2. Press the button to enter the menu of play. AAA Multimedia Player E08-8SOBTILES-1 3. Press the or button to select the desired movie, and then press the button to play. 4. On the menu of play, press the or button to select in turn: File-Play Back Control-Auto channel-Play Mode 5.
Multi-Media Player System (Continued) Multi-Media Player To select the Music and PIC item 1. Press the or button to select the Music and PIC option. AAA Multimedia Player Picture Movie Music Music and PIC 2. Press the button to enter the menu of play. AAA Multimedia Player F-007 F-008 F-009 F-010 F-011 F-012 Note: the play file menu are different with your USB device. 3. Press the or button to MP3 select desired file, and press Play mode the button to confirm it. (Press the button to cancel).
Multi-Media Player System (Continued) Copy file function Copy file function 1. Press the or button to select the File copy option. AAA Multimedia Player Card USB File copy SETUP Remove USB Press ENTER key to enter COPY menu 2. Press the button to enter the copy menu. 3. Press the button to enter the file menu, and press the or button to select "Card" or "USB". CALL/HELP 4. Press the CALL/HELP button to call the menu, and then press the / button to select the file, press the button.
Multi-Media Player System (Continued) Set up Functions To select language 1. Press the or button to select the Setup option. AAA Multimedia Player Card USB File copy SETUP Remove USB Press ENTER button to SETUP menu 2. Press the button to enter the Setup menu. Press the button again to enter the Language option. AAA Multimedia Player Languages 3. Press the or button to select desired language, and press the button to confirm. Version To display the version 1.
External connections In the following, the methods of connecting the video/audio system and PC for the TV set will be explained. Video/Audio Output Connection, VGA Input To Audio/Video input PC VCR Etc.
External connections (Continued) In the following, the methods of connecting the video/audio system and other sets for the TV set will be explained.
Trouble shooting To assist in location possible faults use help guide below. BREAKDOWN PHENOMENON PICTURE SOUND CHECKING The aerial direction and connection Picture with snow Double or Triple Image Noise Normal This is called ghosting which can be minimized with an outside aerial, and good quality cable and terminations. Altering the aerial direction can also minimize this effect.
Specifications Design and specifications are subject to change without notice. [The different specifications of different models] Model Dimensions (mm) Power supply D29FA9-AKM 817 W x 616 H x 390 D ~180V-250V, 50Hz D32FA9-AKM 941 W x 572 H x 418 D ~180V-250V, 50Hz [The same specifications of different models] Color system PAL,SECAM, AV NTSC 3.58, 4.
01 0090508449
