OWNER'S MANUAL ATSC ROUND TV/DVD COMBO POWER TV/AV TV/DTV Q.VIEW INFO 1 2 TV/DVD OPEN/CLOSE 3 5 6 7 9 0 MUTE 4 8 - CC P.MODE SAP CH+ VOL _ MENU VOL + OK S.MODE CHSTOP REV SETUP PAUSE/STEP SUBTITLE PREV FWD . D.MENU REPEAT AUDIO 10+ CH.LIST NEXT A-B SLOW PLAY/ENTER TITLE/PBC SEARCH ANGLE PROGRAM ZOOM D.CALL EXIT ARC GUIDE FAV.LIST AUDIOLIST SLEEP Before operating the unit, please read this manual thoroughly.
PRECAUTIONS FCC WARNING-This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made. LASER SAFETY This unit employs a laser. Only a qualified service person should remove the cover or attempt to service this device, due to possible eye injury.
Important safety Instructions Caution - Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure Product complies with radiation performance standards under the Federal Food, Drug and Cosmetic Act 1. READ THESE INSTRUCTIONS All the safety and operating instructions should be read before the unit is operated. 2. KEEP THESE INSTRUCTIONS The safety and operating instructions should be retained for future reference. 3.
IMPORTANT SAFEGUARDS 19. LIGHTNING To protect your unit from a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the unit due to lightning and power line surges. 20. POWER LINES An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits.
Important safety Instructions 31. LASER BEAM Do not look into the opening of the disc tray or ventilation opening of the product to see the source of the laser beam. It may cause sight damage. 32. DISC Do not use a cracked, deformed, or repaired disc. These discs are easily broken and may cause serious personal injury and product malfunction. 33.
Installation Antenna connection If the picture is not clear or is snowy, it is recommended that an External Aerial is used, this is usually mounted outside. 300 twin-lead cable Antenna adapter (Not supplied) Aerial input 75 standard coaxial type 75 coaxial cable Plug (Not supplied) AC power socket Note: * It is recommended that a 75 ohm coaxial antenna is used to avoid interference. *To avoid interference from electrical signals, do not bind the antenna cable together with any mains lead.
Parts and functions Front panel the TV set POWER Power Indicator Signal Receiver Power Switch The DVD Player Video R/L Audio Channel Position up/down Menu TV/AV/DVD Switching Play the DVD Open/close the DVD Volume up/ down Stop the DVD Remote Receiving TV/AV/DVD Switching Window Stop Power Button Rear panel of the TV set Video Y input terminal COAXIAL OUTPUT Y COMPONENT Cb Cr COAXIAL OUTPUT Video output terminal Audio left channel output terminal OUT IN VIDEO1 Video Cb input terminal
Using the Remote Control Buttons on the remote control Power Switch Open/close DVD Tray POWER TV/AV TV/DVD OPEN/CLOSE TV / AV Mode Selection TV / DTV Mode Selection TV/DTV Q.VIEW INFO MUTE TV / DVD Mode Selection Mute Sound 1 2 5 7 8 Channel / Track Selection - CC 3 6 9 4 Q.VIEW button: Return to Previous Channel 0 On Screen Display SAP button: Second Audio Program CC Mode Selection: Closed captioning (selects mode). - button: select additional channels being broadcasted.
The other video and audio equipment Connections You can connect the DVD,VCR and stereo system to the output to enjoy a higher quality of picture and sound effect. Amplifier To COAXIAL type digital audio input Coaxial cable COAXIAL OUT ANT IN Preparation for the remote control Battery installation ! Remove the battery cover. ! Insert two size AA batteries matching the +/-polarities of the battery to the +/marks inside the battery compartment.
Antenna connections If you are using an indoor or outdoor antenna, follow the instructions below that correspond to your antenna system. If you are using a cable TV service (CABLE), see the Cable TV connections. Combination VHF/UHF antenna (Single 75 ohm cable or 300 ohm twin-lead wire) Connect the 75 ohm cable from the combination VHF/UHF antenna to the RF IN jack.
Cable TV connections This unit has an extended tuning range and can tune most cable channels without using a Cable TV Converter box. Some cable companies offer "premium pay channels" in which the signal is scrambled. Descrambling these signals for normal viewing requires the use of a descrambler device which is generally provided by the cable company.
Connections to other equipment Using the audio/video inputs If you connect the TV to a camcorder or Video Game, you can select different modes by pressing TV/AV. Press TV/AV repeatedly to select the desired mode. "AV1", "AV2" ,"COMPONENT","DVD" or TV channel will display on the screen for 4 seconds, displayed on the screen when no signal input. AV1 AV2 COMPONENT DVD TV Channel no signal AV 1 To connect the TV to a camcorder To playback from the camcorder, connect the camcorder to the unit as shown.
Setting the language and blue screen You can choose from three different languages (English, French and Spanish) for the on-screen displays. SETTING THE LANGUAGE 1 Press POWER ( POWER TV/AV TV/DVD OPEN/CLOSE TV/DTV Q.VIEW INFO MUTE 1 2 3 4 5 6 7 8 9 - 0 ) to turn on the TV. 2 Press MENU, and then press VOL+/- button to select FUNCTION menu, then press CH- button to enter. 0101 FUNCTION LANGUAGE BLUE SCREEN NTSC CAPTION PARENTAL LOCK ENGLISH ON C1 CC P.
Channel menu Here describes the case for searching and memorizing channels for DTV/ATV. POWER TV/AV TV/DTV Q.VIEW INFO MUTE 1 2 3 4 5 6 7 8 9 TV/DVD OPEN/CLOSE - 0 NOTE: CH+ VOL + MENU OK STOP REV FAV.LIST SIZ D.MENU PREV NEXT REPEAT A-B TITLE/PBC SEARCH AUDIO PROGRAM 10+ CLR 2 Press CH+/- button to select the RECEPTION option. SLOW PLAY/ENTER ANGLE CHANNEL menu, then press CH- button to enter. GUIDE SETUP PAUSE/STEP SUBTITLE FWD .
Channel menu SETTING SKIP After the programs are presetting, you can skip some programs so that to select your favorite channels only. 1 Press MENU, and then press VOL+/- button to select CHANNEL menu, then press CH- button to enter. POWER TV/AV TV/DVD OPEN/CLOSE TV/DTV Q.VIEW INFO MUTE 1 2 3 4 5 6 7 8 9 - 0 CH+ REV AUTO select the SKIP option, then press VOL+/- button to select ON or OFF. NOTE: When tuning DTV channels and no signal is present, the SKIP-over option will be available.
Channel selection You can select the channel by using either CH +/- button or Channel number buttons. How to select the channel in each way is shown below. 1 Using CH +/- button POWER TV/AV TV/DTV Q.VIEW INFO MUTE 1 2 3 4 5 6 7 8 9 TV/DVD OPEN/CLOSE - 0 VOL + OK STOP REV FAV.LIST SIZ GUIDE SETUP PAUSE/STEP SUBTITLE FWD . D.MENU Press 2-9 as needed. Example, to select channel 2, press "2". 10-69: Press the 2 digits in order.
Volume adjustment This section describes how to adjust the volume when viewing TV. The MUTE function, which is useful when you have a visitor or a phone call, will be also described. 1 Using VOL +/- button POWER TV/AV TV/DTV Q.VIEW INFO MUTE 1 2 3 4 5 6 7 8 9 TV/DVD OPEN/CLOSE - 0 CC P.MODE SAP CH+ VOL _ VOL + MENU OK STOP REV 2 Using MUTE button Press MUTE button on the remote control to mute the sound. The colored volume bar is displayed on the screen while muting.
Screen information You can display the currently selected channel number or other information such as the audio mode on the screen for checking. POWER TV/AV TV/DTV Q.VIEW INFO MUTE 1 2 3 4 5 6 7 8 9 TV/DVD OPEN/CLOSE - 0 CC VOL _ VOL + MENU OK SLEEP CH- REV To clear the display, press INFO button again. In the digital mode, the detailed information for the currently selected channel such as the program GUIDEe is displayed. CH+ STOP 13 AUTO P.MODE SAP CH.
Video menu SETTING VIDEO 1 Press MENU button. The main menu screen will appear. 2 Press VOL+/- button to select VIDEO Option, then press CH- button to enter. POWER TV/AV TV/DTV Q.VIEW INFO MUTE 1 2 3 4 5 6 7 8 9 CONTRAST BRIGHTNESS COLOR SHARPNESS TINT TV/DVD OPEN/CLOSE - 0 CC P.MODE SAP 0101 VIDEO 80 80 50 50 0 3 Press CH+/- to select the desired option, then press VOL+/- to adjust. CH+ VOL _ VOL + MENU OK SLEEP CHCH.LIST STOP REV FAV.
Audio menu SETTING AUDIO 1 Press MENU button. The main menu screen will appear. 2 Press VOL+/- button to 0101 select AUDIO Option, then press CH- button to enter. AUDIO VOLUME POWER TV/AV TV/DTV Q.VIEW INFO MUTE 1 2 3 4 5 6 7 8 - CC 9 TV/DVD OPEN/CLOSE 0 3 Press CH+/- to select the desired option, then press VOL+/- to adjust. P.MODE SAP CH+ VOL _ Volume VOL + MENU OK This will adjust the sound output level. SLEEP CHCH.LIST STOP REV FAV.
Manual time setting EXAMPLE: Setting the time to "8:30 AM" You must set the time manually for ON/OFF Timer. TO SET TIME 1 Press MENU. The main menu screen will appear. 2 Press VOL+/- button to POWER TV/AV TV/DTV Q.VIEW INFO MUTE 1 2 3 4 5 6 7 8 - CC 9 TV/DVD OPEN/CLOSE 0 P.MODE SAP CH+ VOL _ select TIME option, then press CH- button to enter the submenu.
Setting the ON/OFF timer This feature allows you to have the SETTING THE TIMER ON TV automatically turn on/off at a predetermined time. If you program Press MENU. The main menu The ON/OFF TIMER, the TV will turn on/off at the time your predetermined. 1 screen will appear. 2 Press VOL+/- button to select TIME option, then press CH- button to enter the submenu. POWER TV/AV TV/DTV Q.VIEW INFO MUTE 1 2 3 4 5 6 7 8 9 0 CC P.
Function menu SETTING THE NTSC CAPTION This allows you to configure the way you choose to view the captioning. 1. Press the MENU button and then use VOL+/- button to select the FUNCTION menu. 2. Press CH- button to enter, POWER TV/AV TV/DVD OPEN/CLOSE TV/DTV Q.VIEW INFO MUTE 1 2 3 4 5 6 7 8 9 - 0 CH+ VOL + MENU OK STOP REV select caption: OFF,C1, C2, C MUTE,TEXT1, TEXT2.
Function menu An age limitation can be set to TO REGISTER PASSWORD forbid children to see and hear violent scenes or pictures for Press MENU. The main menu adults, etc. The TV Corresponds to "TV RATING" and "MOVIE RATING". to use theparental control function, Press VOL+/- to select you must register a password. 1 screen will appear. 2 FUNCTION, then press CH- to enter the submenu. 3 Press CH+ to select POWER TV/AV TV/DTV Q.VIEW INFO MUTE 1 2 3 4 5 6 7 8 - CC 9 TV/DVD OPEN/CLOSE 0 P.
Function menu TO CHANGE PASSWORD 1 Press MENU. The main menu screen will appear. 2 Press VOL+/- to select FUNCTION, then press CH- to enter the submenu. POWER TV/AV TV/DVD OPEN/CLOSE TV/DTV Q.VIEW INFO MUTE 1 2 3 4 5 6 7 8 0 - CC 9 3 Press CH+ to select 0101 FUNCTION LANGUAGE BLUE SCREEN NTSC CAPTION PARENTAL LOCK ENGLISH ON C1 PARENTAL LOCK, then press VOL+ to enter the submenu. P.
Function menu TO SET PARENTAL CONTROL ON/OFF 1 Enter the PARENT CONTROL menu. 2 press CH+/- button to POWER TV/AV TV/DTV Q.VIEW 1 2 3 4 5 6 7 8 9 0 select PARENTAL LOCK, press VOL+/- button to set ON or OFF. TV/DVD OPEN/CLOSE INFO MUTE - 3 When you are satisfied with your choice, press MENU button to return to the previous menu. CC P.
Function menu TO SET THE MPAA RATING 1 Enter the PARENT CONTROL menu. 2 Press CH+/- button to POWER TV/AV TV/DVD OPEN/CLOSE TV/DTV Q.VIEW INFO MUTE 1 2 3 4 5 6 7 8 0 - CC 9 P.MODE SAP SLEEP CH- STOP REV FAV.LIST SIZ GUIDE SETUP PAUSE/STEP SUBTITLE FWD . D.
Closed caption WHAT IS CLOSED CAPTIONING? This television has the capability to decode and display closed captioned television programs. Closed captioning will display text on the screen for hearing impaired viewers or it will translate and display text in another language. POWER TV/AV TV/DTV Q.VIEW INFO MUTE 1 2 3 4 5 6 7 8 9 TV/DVD OPEN/CLOSE - 0 CC P.MODE SAP CH+ VOL _ VOL + MENU OK SLEEP CHCH.LIST STOP REV FAV.LIST SIZ GUIDE SETUP PAUSE/STEP SUBTITLE FWD . D.
DTV setup menu SETTING CLOSED CAPTION MODE In DTV mode 1 Press MENU. The main menu screen will appear. POWER TV/AV TV/DTV Q.VIEW INFO MUTE 1 2 3 4 5 6 7 8 - CC 9 TV/DVD OPEN/CLOSE 0 P.MODE SAP CH+ VOL _ OK SLEEP CHCH.LIST STOP REV FAV.LIST select DTV SETUP. then press CH- button to enter the submenu. SIZ GUIDE D.MENU PREV NEXT REPEAT A-B SLOW PLAY/ENTER It only appears when the broadcasting signal bears.
DTV setup menu SETTING THE CC USER SETTING 1 Press MENU. The main menu screen will appear. 2 Press VOL+/- button to POWER TV/AV TV/DTV Q.VIEW INFO MUTE 1 2 3 4 5 6 7 8 - CC 9 TV/DVD OPEN/CLOSE 0 select DTV SETUP. then press CH- button to enter the submenu. 3 Press CH+/- button to 0101 DTV SETUP DTVCC DAYLIGHT SAVING OFF TIME ZONE ALASKA ATSC PARENTAL LOCK select DTV CC. P.
DTV setup menu SETTING THE DTV CAPTION STYLE(continue) Style POWER TV/AV TV/DVD OPEN/CLOSE TV/DTV Q.VIEW INFO MUTE 1 2 3 4 5 6 7 8 Select this option to select the font style of caption display according to your own preference. Press the VOL+/- button to select Style1, Style2, Style3, Style4,Style5, Style6, Style7, Style8. Size 9 - 0 CC Select this option to select the size of caption display according to your own preference.
DTV setup menu SETTING THE DAYLIGHT SAVING POWER TV/AV TV/DVD OPEN/CLOSE TV/DTV Q.VIEW INFO MUTE 1 2 3 4 5 6 7 8 9 0 - 2 Press VOL+/- button to SAP CH+ VOL + MENU OK SLEEP CHCH.LIST STOP REV FAV.LIST SIZ GUIDE SETUP PAUSE/STEP SUBTITLE FWD . D.MENU PREV NEXT REPEAT A-B SLOW PLAY/ENTER TITLE/PBC SEARCH ANGLE AUDIO PROGRAM 10+ CLR ZOOM 1 Press MENU. The main menu screen will appear. CC P.
DTV setup menu SETTING ATSC PARENTAL LOCK 1 Press MENU. The main menu screen will appear. POWER TV/AV TV/DVD OPEN/CLOSE TV/DTV Q.VIEW INFO MUTE 1 2 3 4 5 6 7 8 9 - 0 CH+ SLEEP CH- STOP REV FAV.LIST SIZ GUIDE SETUP PAUSE/STEP SUBTITLE FWD . D.MENU 3 Press CH+/- button to 0101 DTV SETUP DTVCC DAYLIGHT SAVING OFF TIME ZONE ALASKA ATSC PARENTAL LOCK select ATSC PARENTAL LOCK. VOL + MENU OK CH.LIST select DTV SETUP. then press VOL- button to enter the submenu. CC P.
Other Functions GUIDE - This activates some, but not all, electronic program guides (EPG data) when it is used and transmitted by some DTV station providers. It is only supported when receiving DTV channels. POWER TV/AV TV/DTV Q.VIEW INFO MUTE 1 2 3 4 5 6 7 8 - CC 9 TV/DVD OPEN/CLOSE 0 GUIDE 1/3 >> 03:00 ---04:00 Moving picture 480i 4:3 04:00 ---05:00 Moving picture 480i 4:3 P.MODE SAP CH+ VOL _ VOL + MENU OK SLEEP CHCH.LIST STOP REV FAV.LIST SIZ GUIDE 1.
Other Functions QUICKLY VIEW This function enables quick swap to the last watched program. 1 Suppose the channel number you used POWER TV/AV TV/DTV Q.VIEW INFO MUTE 1 2 3 4 5 6 7 8 9 TV/DVD OPEN/CLOSE - 0 CC P.MODE SAP CH+ VOL _ VOL + MENU OK just now is 8 and the channel number you are using is 18 (as shown in the figure). 2 If you want to return to the last watched program channel 8, you can simply press the Q.View button.
DVD Features Basic Playback Preparations Stop playback Press the DVD/TV button on the remote control or the TV to enter the DVD status. Basic playback 1. Press OPEN/CLOSE to open the disc tray, place a disc in the disc tray. There are two different disc sizes. Place the disc in the correct GUIDE on the disc tray. If the disc is out of the GUIDE, it may damage the disc and cause the DVD player to malfunction. Do not place a disc which is unplayable in this DVD player. 2.
DVD Features(Continued) Advanced Playback IMPORTANT NOTE: All described functions are for DVD discs. If you play other format discs, the operation and on screen display will be different. PROGRAM CAPTION SUBTITLE Press "SUBTITLE ", the screen will display "SUBTITLE 01/XX XXXXX", "01" indicates the original number of this language; "XX" indicates total number of language; "XXXXXX" indicates the language of country. (the number of language depends on disc).
Special Playback Functions JPEG DISC PLAYBACK When a disc containing standard JPEG picture files is inserted into the player, a navigation menu will be displayed automatically. Use the UP and DOWN cursor buttons to select a file then press PLAY/ENTER. The slide show will commence. Press PREVIOUS or NEXT to move between pictures. Press pause to stop on the current picture. Press PLAY/ENTER to resume normal playing. A JPEG disc contains JPEG (.
DVD System Setup DVD System Setup General Setup Process SETUP 1.Press the SETUP button, the General Setup Page,Preference Page will be displayed in turn. 2.Press CH+/or b item, then press submenu. PLAY/ENTER to select, the to enter the or bu to select then 3.Press CH+/press PLAY/ENTER to confirm. 4.Press EXIT key or press SETUP repeatedly to exit the set-up menus. ..General Setup Page.. TV Display Angle Mark OSD Lang Spdif Output Caption Screen Saver . LB 4 3:Ps . On 4 3:Lb ENG 16 9 On Off ..
DVD System Setup(Continued) DVD System Setup General Setup Page ANGLE MARK: Users can select a particular camera angle .when playing a DVD which offers multiple angles. This item allows you to set Angle Mark ON or OFF. On Screen Display (OSD) Language: Users can select on-screen display language. ..General Setup Page.. TV Display Angle Mark OSD Lang Spdif Output Captions Screen Saver This DVD player includes three kinds of audio output: 1.
DVD System Setup(Continued) DVD System Setup Preference Page The Preference Page is only available when there is no disc in the player. These settings are applied consistently to all discs which are inserted and played. SETUP PLAY/ENTER PARENTAL: The parental control function works in conjunction with the different censorship classes assigned to DVDs. These classes help to control the types of DVDs that the family watches, There are up to 8 censorship classes for DVDs. ..Preference Page..
DVD System Setup(Continued) DVD System Setup SETUP DEFAULT: Resets all settings (except password and parental lock status) for this DVD player back to the manufacturers original settings. Press ENTER to perform the reset. ..Preference Page.. Parental Password Default Reset PLAY/ENTER Note: Some functions may not be available depending on the type of disc.
Playable Discs The following discs can be played: You cannot play discs other than those listed above. You cannot play non-standardized discs, even if they may be labelled as above. The performance of CD-R or CD-RW disc depends on the way the disc was burned. In a few cases, their performance may not be consistant or may not even operate at all. This DVD Player is designed and manufactured according to the Region Management Information that is recorded on a DVD disc.
Disc Protection and DVD Characteristics Compare DVD disc with other discs: DVD Encode method LD Digital/MPEG Singleside doublelayer 9.4G Doubleside doublelayer 17G 133 242 266 Playing Time minutes minutes minutes 484 minutes Capacity Disc diameter Singleside singlelayer 4.7G Double -side single -layer 8.
Troubleshooting guide To assist in location possible faults use help guide below. BREAKDOWN PHENOMENON PICTURE CHECKING SOUND The aerial direction and connection Picture with snow Double or Triple Image Noise Normal This is called "ghosting" and can be minimized with an outside aerial, and good quality cable and terminations. Altering the aerial direction can also minimize this effect.
Specifications The specifications offered you here are for reference only. With product improvement there may be some differences between the description and the final product. CV1311 CV2011 ATSC 13 90 85 368.8 mm x 378.6 mm x 378.8mm 499.4 mm x 483.5 mm x 481.7mm NOTE Design and specifications are subject to change without notice. Dimensions quoted in this manual are approximate.
46
0090500359 Ver.1.
