Manual

After installingyour air condilioner, plug it into the proper
electricalouzel in the wall.
POWER Turns air conditioner off.
SPEED "LOW" Low speed fan operation with cooling or not.
SPEED "HI" High speed fan operation with cooling or not,
This automatically controls the temperature of indoor air. Turn the knob
so that arrow points to the cooler marks for more moderate cooling.
Normal Fan
1. Turn the SPEED mode switch to the "HI' or the "LOW' setting.
2. Set the thermostat control to tile temperature mark "FAN ONLY'.
Normal cooling
1. Turn the SPEED mode switch to the "HI' or the "LOW' setting,
2. Set the thermostat control to tile desire temperature (the mid-point
is a good garfing position).
If the room temperature is not satislractory after a reasonable time, adjust
Ihe conlrol Io a wormer soiling, os approprialc.
Maximum cooling
1. Turn the ,SPEED mode _witch to the "1I1' seffing
2. Set the thermostat control to the MAX COOL temperature mark.
Quieter operation
1. Turn the ,SPEED nqode switch to the "LOW' seffing.
2. Set the thermostat control as needed.
CAUTION:
" ) Remember the compressor of your air conditioner will not work
when the temperature goes below 65_F.
) Also when you shut off the air conditioner wait for 3 minutes
before turning it on again. This is the compressorcycle time.
2} If you have any trouble in operating your air conditioner please refer to
the Trouble Shootlng section.
13