Manual

Before you install your air conditioner check the following:
The unit is free of all obslructions inside and outside the room e.g. drapes,
curl'ains, furniture, plants, shrubs, bushes, trees, other structures like building,
garage etc. Air conditioner must have clear unobstructed airltow through the
condenser to remove the heat.
2>The window is strong enough to hold the weight of the air conditioner.
Extra brackets or supports may be needed depending on your windows.
(Bracketsor Supports nol provided in all models}
3) The window sill and track are strong enough to hold the weight of the
air conditioner.
4)
The wall is strong enough to hold the unite Extra brackets or supports may be
needed depending on the wall_ (Brackets or Supports not provided in all models)_
5) There is adequate and proper power supply near the air conditioner.
__6) DO NOT use adapter plugs_
7} DO NOT use extension cords.
DO NOT cut or remove the ground prong.
DO NOT modify the plug or the electrical wall outlet in any way_
If plug does not fit the electrical outlet have a certified electrician do the
necessary change.
__10) DO NOT connect electrical power to the unit before installation.
11 ) DO NOT use if power cord is worn out, frayed or otherwise damaged.
Avoid using if there are cracks or abrasion damage along the length,
plug or connection.
,_12) DO NOT install into any existing cabinet or sleeve which does not have side
and top air vents.
_1 Be careful o1 ofthe cabinet and coils
3) ex[go_ed sharp edcjes sharp (tins)
on
the back of the unit that could cut and cause serious injury.
14