Multi-Zone Technical Overview

TECHNICAL OVERVIEW
PAGE 40
ENGLISH
INDOOR WALL MOUNT UNIT TECHNICAL OVERVIEW
Step 6. Remove 6 screws that hold the motor bracket and
evaporator coil.
Step 7. Lift the evaporator coil and remove the motor
bracket.
Step 8 Loosen the motor shaft set screw. Phillips head
screw.
Step 9. Unplug the motor from the circuit board.
Step 10. Lift and slide the motor away from the
blower wheel.
Step 11. Remove the two black anti vibration mounts from
the defective motor and place them on the new
moto r.
Step 12 Install new motor in reverse order.