TV-21H5FT-ME Colour Television Operation Instructions MAIN FUNCTION ◆218 Programs stored ◆Dynamic noise reduction ◆Multi-picture mode ◆Auto-correcting black balance 0090507292
CONTENTS WARNING AND CAUTIONS 1 BASIC FEATURE 2 TECHNICAL SPECIFICATION 2 FUNCTION BUTTONS AND EXTERNAL SOCKETS 3 REMOTE CONTROLLER BOARD 5 OPERATING MENU 6 MULTI FUNCTION TIMER 9 GENERAL OPERATION 11 TELETEXT FUNCTION 13 AV CONNECTION 15 TROUBLESHOOTING GUIDE 16
WARNING AND CAUTIONS 1. When you clean the TV set, please pull out the power plug from AC outlet. Or may result in electric shock, fire or damage to the TV set. Don't clean the cabinet and the screen with benzene, petrol and other chemicals. 2. In order to prolong the using life of the TV set, please place it in a well ventilated location. 4. Do not place the TV set near rain or moisture as it may cause an electric shock, or the TV set to catch fire. The TV set must only be used in dry indoor location.
FUNCTION BUTTONS AND EXTERNAL SOCKETS Antenna IN IN OUT Y VIDEO S-VIDEO L AUDIO Cb Cr R Figure A Figure B Antenna connection Connect an antenna to the antenna socket on the TV set, we recommend using a Cable TV system for better picture and audio quality. 1.If you use a coaxial cable(75Ω),insert the antenna plug (see figure C) into 75Ωsocket (see figure A). 2.
REMOTE CONTROLLER BOARD MARK SCAN MUTE SCAN 1 2 3 ZOOM 4 5 6 CLAL 7 8 9 EIX T -/-- 0 I-II TV / AV SWAP S .SD T P.ST D CH + PP . MENU V OL + V OLCH - PICTURE SOUND TIME ? FUNCTION TUNE SWAP MUTE ZOOM CALL TV/AV -VOL+ -CH+ PICTURE SOUND TIME FUNCTION 0-9 -/-MENU EX I T I-I I FUNCTION DESCRIPTION PROGRAM SCAN STANDBY SWAP PROGRAM BETWEEN THE PRESENT AND THE LAST P.
OPERATION MENU OPERATION MENU 7.Program skip The Program skip feature enables you to skip/hide programs that you do not wish to be displayed when using the CH+/- buttons. These channels will still be displayed by directly using the channel number buttons on the remote controller. To skip , press the CH+/- buttons to select the SKIP item, press the VOL+/- buttons to tune the skip feature on/off. Press the EXIT button to save the setting. 8.
MULTI FUNCTION TIMER MULTI FUNCTION TIMER Multi Function Timer The TV set has in built a comprehensive timer that has five basic functions. 1.Clock 2.On time so that the TV set can be programmed to turn on at a certain time. 3.Off time to allow the TV set to turn off at a preset time. 4.Sleep timer to allow the TV set to turn off after 10 ~ 180 minutes. 5.Program remind timer, that displays an onscreen reminder prompt, when a program on a different channel is due to start.
GENERAL OPERATION 1.Channel Changing (218 possible channels) Use either the CH+/- buttons on the remote controller or the front panel of the TV set to change the channels. Or directly enter the channel number with the numeric button on the remote controller. To select channel numbers from 10 ~ 99, press [-/--] button and enter the two digits channel number. To select channel numbers from 100 ~ 217, press [-/--] button enter the 3 digits channel number. 2.
TELETEXT FUNCTION (FAST TEXT) TELETEXT FUNCTION (FAST TEXT) 1.TV/Teletext Button (Turns the Teletext feature On/Off) [ ] Press the [ ] button on the remote control to turn teletext On/Off. To select a teletext page either directly enter the page number using the numeric key pad on the remote control or use the CH+/- buttons, or the coloured Fast Text buttons. 8.Subtitle [ ] Pressing the [ ] button will get the teletext decoder to automatically search for the subtitle page. 2.
TROUBLE SHOOTING GUIDE AV CONNECTION The following problems are not always caused by hardware failure, please use the follow trouble shooting guide before you call for service: BREAKDOWN PHENOMENON PICTURE IN The direction and connection of the antenna OUT Y VIDEO S-VIDEO IN L AUDIO Cb Picture with Snow Cr R Double or Triple Image Direction of signal B G Y white（left audio） red（Cr /right audio ） blue（Cb） green（Y） yellow（video） VIDEO 3 AUDIO Disturb R Noise Volume, Sound mute Normal
