21T9B-S 21F9B-S COLOUR TELEVISION OPERATING INSTRUCTIONS ◆Stage curtain for open and close effect ◆Digital I2C bus control ◆Auto search tuning & 218 programs stored ◆Full infrared remote control ◆Multi-picture modes selection ◆Multi-function timer, appointing program
CONTENTS Warning and cautions.............................................................................................1 Basic feature...........................................................................................................2 Technical specification...........................................................................................2 Preparing for operations.........................................................................................
WARNING AND CAUTIONS 1. When you clean the TV set, please pull out the power plug from AC outlet. Or may result in electric shock, fire or damage to the TV set. Don't clean the cabinet and the screen with benzene, petrol and other chemicals. 4. Do not place the TV set near rain or moisture as it may cause an electric shock, or the TV set to catch fire. The TV set must only be used in dry indoor location. 2. In order to prolong the using life of the TV set, please place it at a well ventilated location.
PREPARING FOR OPERATIONS FUNCTION BUTTONS AND EXTERNAL SOCKETS 1.Front Panel Antenna Figure B 75-300Ω Antenna adapter Antenna cable with a plug Antenna feeder Figure C Coaxial cable(75Ω) Figure D twin-lead cable(300Ω) Power source wire connection Insert the power plug into AC outlet. Install and replace batteries of the remote control unit: 1.Place the remote control unit with the face down, then open the battery cover of the unit. 2.
AV CONNECTION REMOTE CONTROLLER GUIDE 1 Direction of signal W R B G Y white（left audio） red（Cr /right audio ） blue（C b） green（Y） yellow（video） 18 2 17 1 2 3 SCAN 4 5 6 7 Cr 8 9 0 BAR DISPLAY 20 VOL- To video output To s-video output R B R To component out W R To audio out Y MIX 8 W PRE CH- RESTART EXIT 9 LIGHT SHORT WIDE 7 10 11 Display Invalid button 14 System preset button 12 13 VOL+ FIRE G Programme promote Volume mode selection 10 DVD(with DVD component)
TUNING PROCEDURE POWER SUPPLY 1.Power supply (switch on/off to set main power supply). Press power switch button and the TV set shall be under normal receiving condition. Press it again and the power shall be off. 2.Standby button (remote control power supply). Press the button and the TV set enters standby condition, press it again and the set enters normal receiving condition. TUNING PROCEDURE (1)Press [MENU] button to let TUNING menu display on the screen.
PICTURE ADJUSTMENT Press [MENU] button to select PICTURE menu. Press [-CH+] buttons to select an item. Press [-VOL+] buttons to adjust the value of the item function. OTHER FUNCTIONS 1.FUNCTION 1 The function can select OSD language, curtain mode,volume mode and volume memory mode. (1)Press [MENU] button to select FUNCTION1 menu. (2)Press [-CH+] buttons to select an item. (3)Press [-VOL+] buttons to set function of the item . PICTURE CONTRAST 100 BRIGHT 50 COLOR 50 SHARP 50 B.
OTHER FUNCTIONS (3).POS.EX item: Press [VOL+] button to enter its sub-menu(digits In POS.EX and EX.POS2 items are present channel No.). Press [-CH+] buttons to select EX.POS2 item. Press [CH+] button to put into channel No.(for example:9). Press [-CH+] buttons to select EXCHANGE item, press [VOL+] button to approve. The program in channel No. 1 will change with the program in channel No.9.
OTHER FUNCTIONS 4.System selection: (1)Press [SYSTEM] button, OSD is as figure. (2)Press [-CH+] buttons to select an item. (3)Press [-VOL+] buttons to select a system(color system or sound system) you need. MULTI FUNCTION TIMER COLOR AUTO SOUND B/G SELECT ADJUST DYNAMIC 5.Picture mode selection: Press [SELC.PIC] button to select a picture mode you need: STANDARD MILD MEMORY PICTURE MUTE COLOR MUTE 6.
LOCK FUNCTION LOCK FUNCTION Lock preset 定时关机功能 The TV set can lock search, channel number, AV, timer and child lock items, if you need to lock them. Changing password The password of the TV set is preset "0000" in manufacture, if you want to change the password, you can fill in four digits. LOCK LOCK 1.Press [LOCK] button , OSD is as the right figure. LOCK OR UNLOCK PASSWORD: ---- 1.Press [LOCK] button, OSD is as the right figure.
TROUBLE SHOOTING GUIDE The following problems are not always caused by hardware failure, please use the follow trouble shooting guide before you call for service: BREAKDOWN PHENOMENON PICTURE CHECKING SOUND The direction and connection of the antenna Picture with Snow Double or Triple Image Disturb Noise Direction, station and connection of the antenna Normal Interference from electric appliance. Automobile、Motor, Vehicle Fluorescence lamp etc.
