User's Manual

8
Installation Instructions
. ATTACH INTERCONNECT CABLE (continues)
3)...Set.the.ACM.on.the.countertop.or.attach.it.to.the.side.of.the.appliance.or.
bracket
4)..Press.the.button.on.the.Appliance.Communication.Module.to.initiate.the.
network.joining.process.The.indicator.light.will.gradually.brighten.and.then.
dim.repeatedly.until.joined
Note: In.order.for.the.Appliance.Communication.Module.to.join.either.the.Smart.
Meter.or.Nucleus.Energy.Manager.network,.the.“Install.Code”.and.“MAC.Ad-
dress”.of.the.module.are.required..This.information.can.be.found.on.the.rating.
plate.label.on.the.bottom.of.the.module
If.joining.a.Smart.Meter.network,.please.provide.this.information.to.your.util-
ity..If.joining.a.Nucleus.Energy.Manager,.please.enter.this.information.when.
prompted.by.the.installation.program.
When.the.Appliance.Communication.Module.successfully.joins.the.Smart.Meter.
or.Nucleus.Energy.Manager.network,..the.indicator.light.will.come.on.for.a.
full.second.and.then.flash.1.–.4.flashes.indicating.the.utility.energy.rate.One.
flash.indicates.a.low.rate.(or.no.rate),.two.flashes.indicate.a.medium.rate,.three.
flashes.indicate.a.high.rate,.and.four.flashes.indicate.a.critical.rate..The.number.
of.flashes.you.see.depends.on.your.specific.utility.rate.plan
Note if joining Nucleus™: .If.after.several.minutes.the.ACM.has.not.located.a.
rate,.the.appliance.may.be.blocking.the.RF.signal.from.reaching.the.ACM..Try.
moving.the.ACM.to.a.different.location.and.try.again
Note if joining Smart Meter: .This.may.take.several.hours.depending.on.how.
long.it.takes.your.utility.to.turn.your.electric.meter.“ON”.for.joining..If.module.
light.continues.to.gradually.brighten.and.dim.repeatedly.contact.your.utility
4