User's Manual

Installation Instructions

...ATTACH MOUNTING BRACKET (OPTIONAL)

If.using.the.mounting.bracket,.attach.

to.the.cabinet.or.wall.with.the.screws.

provided.Wall.anchors.(not.included).

may.be.used.for.mounting.to.drywall,.tile,.

concrete.or.other.surfaces

..ATTACH INTERCONNECT CABLE

1)..Attach.one.end.of.the.interconnect.cable.to.the.appliance.(Electric.ranges.are.

shipped.from.the.factory.with.the.cable.connected).See.the.instructions.on.the.

appliance.for.the.exact.location.Either.a.long.or.a.short.cable.may.be.used.to.

work.with.your.specific.installation

If.a.longer.cable.is.desired,.you.will.need.to.purchase.a.standard.CAT5.patch.

cable.or.use.GE.Kit.DR07X10010..The.maximum.cable.length.should.not.exceed.

20’

NOTE: Do not use cables labeled “Crossover.” These will mix the signals and cause

the module to not operate properly.

2)..Attach.the.other.end.to.the.interconnect.cable.to.the.ACM.at.the.connector.

location.on.the.back..The.indicator.light.will.flash.at.a.rate.of.1.second.on,.1.

second.off