User's Manual

ATTACH PROFILE™ LAUNDRY “Y” ADAPTOR

(DR07X10003)(WASHER OR DRYER ONLY)

For.washer/dryer.pairs,.attach.the.“Y”.adaptor.

cable.to.the.serial.port.on.the.back.of.either.the.

washer.or.dryer.Attach.the.serial.cable.(supplied.

with.the.dryer).to.the.“Y”.adaptor.Attach.the.

other.end.of.the.serial.cable.to.the.remaining.

appliance.The.third.leg.of.the.“Y”.adaptor.has.a.

socket.for.installing.the.interconnect.cable

Installation Instructions

Interconnect.Cable

Serial.Cable

SELECT LOCATION TO INSTALL THE ACM (continues):

NOTE: If module needs to be placed farther from appliance extension kit

DR07X10010 sold separately is available.

To.mount.inside.cabinets,.drill.3/4”.diameter.holes.in.inconspicuous.locations.for.

routing.the.interconnect.cable.For.built-in.appliances,.see.the.template.with.the.

appliance.for.precise.locations

WARNING: RISK OF ELECTRICAL SHOCK - .Do.not.drill.into.

electrical.wiring.inside.walls.or.cabinets.when.drilling.holes

..Tip:.For.dishwasher.installation,.it.is.easiest.to.route.the.interconnect.cable.at.the.

time.of.installation.through.the.same.hole.as.the.drain.line.Locate.the.module.

under.the.sink

NOTE: To avoid water damage to the module do not place near washer hose

connections or under sink near water connections.

NOTE: To avoid interference, run interconnect cable through a separate hole

than the power cable to the appliance.