User's Manual

For a host using a this FCC certified modular with a standard fixed label, if (1) the module’s FCC
ID is not visible when installed in the host, or (2) if the host is marketed so that end users do not
have straightforward commonly used methods for access to remove the module so that the FCC
ID of the module is visible; then an additional permanent label referring to the enclosed module:
“Contains Transmitter Module FCC ID: ZKJ-BLEB001” or “Contains FCC
ID: ZKJ-BLEB001” must be used. The host OEM user manual must also contain clear
instructions on how end users can find and/or access the module and the FCC ID.
8. Host product is required to comply with all applicable FCC equipment authorizations
regulations, requirements and equipment functions not associated with the transmitter module
portion. compliance must be demonstrated to regulations for other transmitter components within
the host product; to requirements for unintentional radiators (Part 15B). To ensure compliance
with all non-transmitter functions the host manufacturer is responsible for ensuring compliance
with the module(s) installed and fully operational. If a host was previously authorized as an
unintentional radiator under the Declaration of Conformity procedure without a transmitter
certified module and a module is added, the host manufacturer is responsible for ensuring that the
after the module is installed and operational the host continues to be compliant with the Part 15B
unintentional radiator requirements. Since this may depend on the details of how the module is
integrated with the host, we suggest the host device to recertify part 15B to ensure complete
compliance with FCC requirement: Part 2 Subpart J Equipment Authorization Procedures ,
KDB784748 D01 v07, and KDB 997198 about importation of radio frequency devices into the
United States.
FCC Certification Requirement:
The end product with an embedded - MODEL BB2707-25 may also need to pass the
FCC Part 15 unintentional emission testing requirements and be properly authorized
per FCC Part 15.
Note: If this module is intended for use in a portable device, you are responsible
for separate approval to satisfy the SAR requirements of FCC Part 2.1093.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.