User's Manual

Please be noticed following information and instructions should
be placed in the end-user
’
s operating manual
1. Separate approval is required for all other operating configurations, including portable
configurations with respect to 2.1093 and different antenna configurations.
2. The MODEL BB2707-25 and its antenna must not be co-located or operating in conjunction
with any other transmitter or antenna within a host device. This equipment complies with
FCC RF radiation exposure limits set forth for an uncontrolled environment.
3. A label must be affixed to the outside of the end product into which the MODEL BB2707-25
module is incorporated, with a statement similar to the following: For MODEL BB2707-25:
This device contains FCC ID: ZKJ-BLEB001.
4. The module shall be in non-detachable construction protection into the finished products, so
that the end-user has to destroy the module while remove or install it.
5. This module is to be installed only in fixed applications. According to FCC part 2.1093(b)
definition of portable devices is:.
Portable device:
For purposes of this section, a portable device is defined as a transmitting device designed to be
used so that the radiating structure(s) of the device is/are within 20 centimeters of the body of the
user.
6. Separate approval is required for all other operating configurations, including portable
configurations with respect to FCC Part 2.1093 and different antenna configurations.
7. A certified modular has the option to use a permanently affixed label, or an electronic label. For
a permanently affixed label, the module must be labelled with an FCC ID: ZKJ-BLEB001. The
OEM manual must provide clear instructions explaining to the OEM the labelling requirements,
options and OEM user manual instructions that are required