User's Manual

21
Change code：By default, the preset lock code is 0000.
Emergency numbers: You can use your phone for emergency calls. However, connections
in call conditions cannot be guaranteed. You should never rely solely on the phone for
essential communications. There are three emergency numbers you can set.
Reset to default
Reset setting: Use this menu to reset the phone’s settings you have changed.
Reset phone: Use this menu to clear all data (include Call History, Contacts (Phone)) that
you have stored.
Call restriction: This network service allows you restrict your calls.
PIN management: In the standby mode, press <Menu> to access the Main
menu >Settings > Security> PIN management and one of the following menus: PIN lock,
PIN change.
Call setup
Auto answer: Set the phone to answer the incoming call automatically after 3 sec.
Answer call: Use this menu to set the phone answer call method. Press any key to answer
call except of course Left soft key [Silence], Right soft key [Reject], End key. A compatible
headset or enhancement needs to be attached to the device for the call to function properly.
22
Show call time: Use this menu to display or hide the call time during your conversation and
call ended screen.
Call forward: This network service reroutes incoming calls to a phone number that you
specified.
Call waiting: Call if your wireless provider supports this feature, call waiting notifies you of an
incoming call even while you are in a call. You can accept, reject, or ignore the incoming call.
Set international prefix: In the standby mode, press <Menu> to access the Main
menu >Settings >Call setup> Set international prefix, and use the following menus.
Voice privacy: Use this menu to protect your voice content during a call.
Phone info
You can get SW version and PRL version.
Keyguard
Use this menu to set the keypad of your phone to lock automatically after a preset time delay
when the phone is in the standby mode and no function of the phone has been used.