User Guide

Optional Accessories:

• PS/II to PDA connector and car charger

• PS/II to DB9 adapting cable

• PS/II to USB adapting cable

HI-204

III

-XXXX

(Pocket PC Plug)

HI-204

III

-DB9

HI-204

III

-USB

APPENDIX B

DEFAULT VALUES

The product has the following factory preset default values:

Datum:000 (WGS-84)

NMEA Enable Switch:GGA ON

GLL ON

GSA ON

GSV ON

RMC ON

VTG ON

Checksum ON

Baud Rate:4800 Baud

Elevation Mask:5 degrees

DOP Mask:DOP Select: Auto

GDOP: 20

PDOP: 15

HDOP: 8

Receiver Operating Mode:Normal Mode (without 1PPS)

Commands can be issued to the HI-204L to change the settings of the

receiver. The new settings will remain effective on next power-on as

long as the on-board rechargeable backup battery is not discharged.

After the backup battery is discharged, factory preset default settings

will be used.