User Guide

For notebook PC use:

HI-204

III

PS/II can also

connect with a PS/II to DB9

PS-232 serial cable or USB

connector.

Pocket PC

HI-204

III

PS/II GPS receiver Can Connecting to a female

PS/II Connector. One end from the female Connector is

+12V car charger (charging PDA and GPS receiver

simultaneously) the other end form the female PS/II

connector is the PDA connector for

connecting your PDA.

APPENDIX B

DEFAULT VALUES

The product has the following factory preset default values:

Datum:000 (WGS-84)

NMEA Enable Switch:GGA ON

GLL ON

GSA ON

GSV ON

RMC ON

VTG ON

Checksum ON

Baud Rate:4800 Baud

Elevation Mask:5 degrees

DOP Mask:DOP Select: Auto

GDOP: 20

PDOP: 15

HDOP: 8

Receiver Operating Mode:Normal Mode (without 1PPS)

Commands can be issued to the HI-204L to change the settings of the

receiver. The new settings will remain effective on next power-on as

long as the on-board rechargeable backup battery is not discharged.

After the backup battery is discharged, factory preset default settings

will be used.