User Guide

15
As long as enough satellite signals are received to generate
valid position fixes, the 1PPS output remains synchronized
to the GPS second, and the 1PPS Valid Signal remains
active. If signal blockage prevents the receiver from
generating valid position fix, the 1PPS output will drift away
from the GPS second and the 1PPS Valid Signal will
become inactive. Upon re-acquiring enough satellites to
generate consecutive valid position fixes, the 1PPS Valid
Signal will become active again, signaling that the 1PPS
output is again synchronized with the GPS second.
For best stable operation of the 1PPS signal, it is to be
operated in static environment having clear view of the sky.
APPENDIX B
DEFAULT VALUES
The product has the following factory preset default values:
Datum:000 (WGS-84)
NMEA Enable Switch:GGA ON
GLL ON
GSA ON
GSV ON
RMC ON
VTG ON
Checksum ON
Baud Rate:4800 Baud
Elevation Mask:5 degrees
DOP Mask:DOP Select: Auto
GDOP: 20
PDOP: 15
HDOP: 8
Receiver Operating Mode:Normal Mode (without 1PPS)
Commands can be issued to the HI-204L to change the settings of the
receiver. The new settings will remain effective on next power-on as
long as the on-board rechargeable backup battery is not discharged.
After the backup battery is discharged, factory preset default settings
will be used.