HI-406BT Bluetooth GPS receiver 1
Table of Contents 1.1 Overview ........................................... 1.2 Main Features ..................................... 3 4 2.1 Setting up: Bluetooth GPS receiver ........ 5 3. Dimensions .......................................... 11 4. Packaging 4.1 Standard Packaging .............................. 12 4.2 Optional Packaging ............................... 15 5. System Specifications ............................. 19 6. Get Connected; Installation Guide 6.1 Laptop PC Installations ............
1.1 Overview Introduction HI-406BT is a GPS (Global Positioning System) receiver in wireless Bluetooth interface with buildin active antenna and extra digital compass functions. With HI-406BT, your mobile devices, such as, Smartphone, PocketPC, laptopPC, tabletPC, etc. can receive GPS data wirelessly and perform the GPS applications, such as, car navigation, personal navigation, route planning, tracking, etc.
1.2 Main Features: • 20 Channels "All-In-View" Tracking • Position accuracy of 10 meters 2D RMS • Cold/Warm/Hot Start Time: 42/38/1 Seconds (Signal Strength > 30 dB-HZ) • Reacquisition Time: 0.
2.1 Setting up: Bluetooth GPS receiver STEP 1: Open the battery cap and put the battery (406-BTT) into the battery compartment.
STEP 2 Connect the AC charger to home electronics outlet or connect the inclusive DC charger to the car cigarette lighter. As soon as they connected, the solid amber light on the right side in front of HI-406BT will turned on (stay on) meaning the battery charging.
STEP 3 As soon as the battery fully charged, the amber light will turned off, then, unplug the charger.
STEP 4 There is switch on side of HI-406BT. The switch on the right side is for Bluetooth GPS receiver. As soon as turn on the switch on the side, the GPS receiver will start to function and search the satellites. Meanwhile, the LED indicator on the right side in front of HI-406BT will turned green (stay on - the GPS receiver not get 3D fixed yet) Please make sure place the HI-406BT outdoor open space so that it can get the proper satellite signal.
Bluetooth GPS Switch LED indicator color Status Amber LED off Green (blinking) Green (Stay on) HI-406BT battery charging HI-406BT battery fully charged GPS in 3D fixed GPS searching more satellite and not in 3D fixed yet Blue (blinking) Blue (stay on) Red Bluetooth searching host device Bluetooth paired and connected HI-406BT battery low 9
STEP 5: As soon as turn on the switch on the right side, the Bluetooth will also start to function and searching. The blue light on the left side in front of HI-406BT will turned on (Blinking) meaning the Bluetooth is searching the host device and not get paired yet. Please consult the Bluetooth step by step connection guide from this manual on section. The pin code is " 0000 " when asked the pin code. After the Bluetooth paired and connected, the blue light will stay on.
3. Dimensions Unit: mm Top View Button View 64.80 46.40 Side View Front View Back View 24.
4. Packaging 4.1 Standard Packaging: Model Name model# 1 Bluetooth GPS receiver HI-406BT 2 Rechargeable Li-Polymer 406-BBT 3.
2 3 4 13
5 6 7 14
4.2 Optional Packaging: Model Name 1. MMCX external antenna 2. mini-1394 to PS/II connecting cable 3.
MMCX antenna Under blocking area, the external antenna can extend the signal reception from HI-406BT 16
PS2-1394 By connecting to different optional connecting cables, HI-406BT can be a wired PS/II GPS receiver and used with all kinds of mobile devices.
HI-406BT as a GPS mouse By counecting different optional counecting cables, HI-406BT can be all kinds of wired GPS receiver solutions.
5. System Specifications Main Features GPS General Chipset SiRF Star III Channel Supports 20-channel Frequency L1 (1575.42MHz), CA code TTFF (Open Sky) Hot Start 8 sec. Warm Start 38 sec. Cold Start 42 sec.
Bluetooth General Frequency Modulation Method Max. Data rate Transmission Power (Maximum) Hoping Receiving Signal Range Receiver IF Frequency Baseband Crystal OSC Compliant 2400MHz to 2483.5MHz GFSK, 1Mbps, 0.5BT Gaussian Asynchronous: 723.2kbps/57.6kbps Synchronous: 433.9kbps/433.9kbps 4dBm(Class 2) 1600hops/sec,1MHz channel space -84 to -15dBm 1.5MHZ center frequency 16MHz Bluetooth Specification v1.1 Electrical Main power input Power consumption Backup Power Operation time 5±5%VDC 0.4W @ 3.
GPS Firmware Protocol Baud Rate Update Rate Datum NMEA/SiRF Binary 19200 bps 1Hz WGS84 Environmental Temperature Operating Temperature 10°C to +55°C Storage Temperature 20°C to +65°C Relative Humidity 5% to 95%, non-condensing LED Indicator LED 1 Color Blue Flashing Blue Red BT Active Yes No - Low Power Yes GPS Fix Status No Yes - Battery Charging Yes LED 2 Color Green Flashing Green Orange 21
6. Get Connected; Installation Guide 6.
Double Click "GPS OUTPUT on HI-406BT" 23
Key in pin code: “0000” Connected 24
6.
Double click “HI-406BT” 26
Key in pin code: “0000” Found the host device 27
For Connected with device Select the correct com port 28
Start GPS, NMEA message inflow 29 More satellites info
Notice : The changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. IMPORTANT NOTE: To comply with the FCC RF exposure compliance requirements, no change to the antenna or the device is permitted. Any change to the antenna or the device could result in the device exceeding the RF exposure requirements and void user’s authority to operate the device.
FCC INFORMATION The Federal Communication Commission Radio Frequency Interference Statement includes the following paragraph: The equipment has been tested and found to comply with the limits for a Class B Digital Device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
