Cut Sheet

www.homeauto.com
6
1000W UPB™ Dimmer Switch
Device Maximum Load 1000W
No Fins Removed Deep Box 1000W
No Fins Removed Normal Depth Box 900W
One Fin Removed Next to One Dimmer 800W
Both Fins Removed Next to Two Dimmers 600W
When the 1000W UPB Dimmer Switch switch is mounted in a normal depth wall box it must be
de-rated from 1000W to 900W.
For a proper fit in a multiple gang installation, it may be necessary to remove one or both of the
break-off tabs on the sides of the 1000W switch. When tabs are removed, the overall rating of the
device must be reduced in accordance with the following chart:
Description Load
For a proper fit in a multiple gang installation, it may be necessary to remove one or
both of the break-off tabs on the sides of the 1500W switch. When tabs are removed,
the overall rating of the device must be reduced in accordance with the following chart:
Device Maximum Load * 1500W
No Fins Removed Large Box ** 1200W
No Fins Removed Normal Depth Box 1000W
One Fin Removed Next to One Dimmer 800W
Both Fins Removed Next to Two Dimmers 700W
* When in a PCS Lighting Control Panel
** Large Wall Box = greater than 40 Cubic Inches
1500W UPB™ Dimmer Switch
Description Load
De-Rating Information