VALVE 12AU7 Boost Pedal Made in USA
VALVE – 12AU7 Boost Pedal 2 Copyrights & Trademarks Copyright Hagerman Amplification 2021. All rights reserved. No part of this document may be photocopied, reproduced, or translated to another language without prior written consent. Disclaimer The information contained in this document is subject to change without notice. Hagerman Amplification shall not be liable for errors contained herein or for consequential damages in connection with the furnishing, performance, or use of this material.
VALVE – 12AU7 Boost Pedal Description VALVE is an all-tube boost pedal (no silicon involved) operating in starved-plate and starved-heater mode, which is difficult to pull off. Most attempts (Matsumi) fail due to excess grid current at such low bias. This new design solves those issues, breathing life into the tube, achieving full bandwidth and performance, all while maintaining that gooey non-linear tube goodness. This pedal will warm up your tone like nothing else. Destined to be your always-on pedal.
250mA INRUSH CURRENT 9V 135mA J3 R8 10k COPYRIGHT 2021 HAGAMPS.