Specification Sheet

Certified
Hardware
Assembly Configuration
Door Size
Door Stiffness
Class
Design Load
Florida Certification
Number (FL#)
Single - Out Swing 3-0 x 7-0 - 1150 lbf (100 psf)*
Single - Out Swing 4-0 x 8-0 - 1150 lbf (70 psf)*
Single - Out Swing 3-0 x 7-0 - 1150 lbf (100 psf)*
Single - Out Swing 4-0 x 8-0 - 1150 lbf (70 psf)*
Single - Out Swing 3-0 x 7-0 - 1150 lbf (100 psf)*
Single - Out Swing 4-0 x 8-0 - 1150 lbf (70 psf)*
Single - Out Swing 3-0 x 7-0 - 860 lbf (80 psf)*
Single - Out Swing 4-0 x 8-0 - 860 lbf (50 psf)*
Single - Out Swing 3-0 x 7-0 - 1150 lbf (100 psf)*
Single - Out Swing 4-0 x 8-0 - 1150 lbf (70 psf)*
780-112 Roton
Hinge
Single Swing 4-0 x 8-0 max. I
1150 lbf (72 psf)*
350 ft-lbs Impact
6118
780-111, 780-224,
780-226 Roton
Hinge (SD & HD)
Single Swing 4-0 x 8-0 max. I
1150 lbf (72 psf)*
350 ft-lbs Impact
13776
BB1191 Hinge
Single - Out Swing - - 1780 lbf**
6118
1279, 1191,
BB1279,
BB1168, BB1199
Single - Out Swing - - 1780 lbf**
13776
Severe Windstorm Resistant Components for Swinging Door Assemblies
ANSI A250.13 - 2003 Standard
4500 Rim Exit
Device
Single - Out Swing
4-0 x 8-0 max.
I
+/- 70 psf
350 ft-lbs Impact
9481
3500 Series Grade
2 Lockset
13178
** This load indicates the design load for a single butt hinge. Maximum wind load should be calculated based on door size, number of hinges used, and the other available door
hardware on the door assembly.
3100 Series Grade
1 Deadbolt
3200 Series Grade
2 Deadbolt
3400 Series Grade
1 Lockset
* Load in parenthesis indicates the equivalent load in pounds per square foot based on indicated door size and door stiffness (if applicable). This load is based on the hardware item
taking half of the force applied to the door assembly by the wind load and the hinges taking the other half.
4700 Rim Exit
Device
Single - Out Swing
The following products have been approved for statewide acceptance by the Florida Building Commission pursuant to Rule 9B-
72.090, F.A.C., for approval of products and systems for use on Exterior Swinging Door Assemblies, in compliance with the
structural requirements of the 2007 Florida Building Code. Verification of Florida Statewide acceptance can be found at
www.floridabuilding.org under the Product Approval section.
3800 Series Grade
1 Mortise
12932
4-0 x 8-0 max.
I
+/- 40 psf
350 ft-lbs Impact
4500 SVR Exit
Device
Out Swing
8-0 x 8-0 pair max.
I
+/- 50 psf
350 ft-lbs Impact
6118
6118
6118
7683
8293