Specification Sheet

ManualsBrandsHager ManualsHardwareGrade 2 Zinc Dummy Set Apollo Door Knob with 3" Diameter Rose from the 3500 Collection

3500 Series Knob

Description: Cylindrical Locks - Grade 2 > 3500 Series Knob

Applications - Standard Duty Commercial Door Thickness - 1 3/8" - 1 3/4"

- Standard Door Prep - 2 1/8" Diameter (Cross

Bore)

- Latch Hole - 1" Diameter (Edge Bore) Backset - 2 3/4"

- 2 3/8" - Optional

Certifications - BHMA Certified ANSI A156.2, Series 4000,

Grade 2

- UL/cUL Listed for all functions up to 3 hours for

''A'' label single doors

Latchbolt - 1/2" Throw - Stainless Steel

- UL10C/UBC 7-2 (1997) Positive Pressure Rated - 2 1/4" x 1 1/8" Faceplate

- UL10B Neutral Pressure Rated - Deadlocking latchbolt prevents manipulation

when door is closed; keyed functions only

Knob Diameter - 2-9/32" (58 mm) Strikes - ANSI 4-7/8" x 1-1/4" strike - standard

- Optional strikes available

Rose Diameter - 3" (76 mm)

Functions - 53 Entry

Exposed Trim - Wrought Brass or Stainless Steel - 70 Classroom

- 80 Storeroom

Lock Chassis - Heavy guage steel, zinc dichromated for

corrosion resistance

- 40 Privacy

- 10 Passage

Keys - Two brass keys per lock - 17 Dummy

Cylinders - Brass 6-pin - Keyed Different - C Keyway Finishes - US3, US32D

- Other keying options available from the factory

Summary of content (12 pages)

PAGE 1
3500 Series Knob Description: Cylindrical Locks - Grade 2 > 3500 Series Knob Applications - Standard Duty Commercial - Standard Door Prep - 2 1/8" Diameter (Cross Bore) - Latch Hole - 1" Diameter (Edge Bore) Door Thickness - 1 3/8" - 1 3/4" Backset - 2 3/4" - 2 3/8" - Optional - BHMA Certified ANSI A156.
PAGE 2
ITEM FILE NUMBER NO. 1 S-LS00960 DESCRIPTION QTY.
PAGE 3
ITEM FILE NUMBER NO. 1 S-LS00952 DESCRIPTION QTY. OUTSIDE ROSE (KNOB) 1 2 S-LS01058 DUMMY KNOB ASSEMBLY 1 3 S-LS00444 KNOB DUMMY MOUNTING PLATE 1 4 S-LS00448 FINISH WASHER 1 5 Flat Head 100 Screw_AI 1/4-20 x 2" FPHMS 1 2 4 5 1 3 HAGER RESERVES THE RIGHT TO MAKE DESIGN THE INFORMATION CONTAINED MATERIAL CHANGES IN THIS DRAWING IS THE SOLE Material WITHOUT NOTICE. CALL HAGER PROPERTY OF HAGER FINISH ENGINEERING AT COMPANIES.
PAGE 4
ITEM FILE NUMBER NO. 1 S-LS00960 DESCRIPTION QTY.
PAGE 5
ITEM FILE NUMBER NO. 1 S-LS00960 DESCRIPTION QTY. KNOBSET CHASSIS - 53 FUNCTION 1 2 S-LS00966 INSIDE ROSE LINER 1 3 S-LS00962 OUTSIDE ROSE LINER 1 4 S-LS00952 INSIDE ROSE (KNOB) 1 5 S-LS00952 OUTSIDE ROSE (KNOB) 1 6 S-LS00617 6-PIN DRILLED CYLINDER 1 6.
PAGE 6
ITEM FILE NUMBER NO. 1 S-LS00960 DESCRIPTION QTY. KNOBSET CHASSIS - 70 FUNCTION 1 2 S-LS00966 INSIDE ROSE LINER 1 3 S-LS00962 OUTSIDE ROSE LINER 1 4 S-LS00952 INSIDE ROSE (KNOB) 1 5 S-LS00952 OUTSIDE ROSE (KNOB) 1 6 S-LS00617 6 PIN DRILLED CYLINDER 1 6.
PAGE 7
ITEM FILE NUMBER NO. 1 S-LS00960 DESCRIPTION QTY.
PAGE 8
ITEM FILE NUMBER NO. 1 S-LS00960 DESCRIPTION QTY. KNOBSET CHASSIS - 80 FUNCTION 1 2 S-LS00966 INSIDE ROSE LINER 1 3 S-LS00962 OUTSIDE ROSE LINER 1 4 S-LS00952 INSIDE ROSE (KNOB) 1 5 S-LS00952 OUTSIDE ROSE (KNOB) 1 6 S-LS00617 6-PIN DRILLED CYLINDER 1 6.
PAGE 9
LOCKS HAGER LOCKSET KNOB AND LEVER OPTIONS APOLLO KNOB Available on: • 3400 Series • 3500 Series ARCHER LEVER Available on: • 3400 Series • 3400 Series (Electrified) • 3500 Series • 3600 Series • 3700 Series • 3800 Series - Escutcheon • 3800 Series - Sectional • 3800 Series - Escutcheon (Electrified) • 3800 Series - Sectional (Electrified) • 2500 Series AUGUST LEVER Available on: • 3400 Series • 3400 Series (Electrified) • 3500 Series • 3600 Series • 3700 Series • 3800 Series - Escutcheon • 3800 Series -
PAGE 10
Hager Companies, Inc 139 Victor Street Saint Louis, MO 63104 HAGER TEST REPORT NO.: LS04001 EVALUATION OF Hager Companies 3500 Series Grade 2 Knob Lockset TEST PARAMETERS: This report covers tests and/or evaluations performed using the following standard(s) as a guideline: ANSI/BHMA A156.2-1996 American National Standard for Bored and Preassembled Locks & Latches. Testing was conducted by Intertek Testing Services NA, Inc., at their Middleton, WI facility.
PAGE 11
LOCKS 3500 SERIES LOCKS HOW TO ORDER 3 3510 2 /8” US3 US26 APL SCC KA ASA TW Interior Finish Function 10 - Passage, Closet Latch/Single Locking 17 - Single Dummy Trim 25 - Communicating, Exit 27 - BTB Dummy Trim 40 - Privacy, BEdroom, Bath Lock 50 - Office 53 - Entry/Double Locking 70 - Classroom Lock 73 - Corridor 79 - Keyed Communicating 80 - Storeroom Lock (if different) Finish US3 - Knob/Lever US4 US10 US10B US26D US32 US32D - Knob Only (70 (70 (60 (60 mm), mm), mm), mm), Product Group SCC - S
PAGE 12
/09/2009 The following products have been approved for statewide acceptance by the Florida Building Commission pursuant to Rule 9B-72.090, F.A.C., for approval of products and systems for use on Exterior Swinging Door Assemblies, in compliance with the structural requirements of the 2007 Florida Building Code. Verification of Florida Statewide acceptance can be found at www.floridabuilding.org under the Product Approval section. Severe Windstorm Resistant Components for Swinging Door Assemblies ANSI A250.