Specification Sheet

LATCH LOCKING CAM
LEFT HAND & LEFT HAND REVERSE MOUNTING - USE A SCREWDRIVER TO ROTATE THE CAM COUNTER-CLOCKWISE 1.
UNTIL IT STOPS. ROTATE THE CAM BACK THE OTHER DIRECTION UNTIL IT LOOKS LIKE THE PICTURE ABOVE.
RIGHT HAND & RIGHT HAND REVERSE MOUNTING - USE A SCREWDRIVER TO ROTATE THE CAM CLOCKWISE UNTIL
IT STOPS. ROTATE THE CAM BACK THE OTHER DIRECTION UNTIL IT LOOKS LIKE THE PICTURE IN DETAIL "D".
INSERT THE PACKAGED TAILPIECE INTO THE IC CORE CYLINDER. 2.
INSERT THE IC CORE CYLINDER INTO THE LOCKSET LEVER UNTIL IT SITS FLUSH. 3.
REMOVE THE CONTROL KEY 4.
DETAIL D
LATCH LOCKING CAM
LEFT HAND/ LEFT HAND REVERSE SHOWN
LEFT HAND / LEFT HAND REVERSE SHOWN
LEFT HAND & LEFT HAND REVERSE MOUNTING - USE A SCREWDRIVER TO ROTATE THE CAM COUNTER-CLOCKWISE 1.
UNTIL IT STOPS. ROTATE THE CAM BACK THE OTHER DIRECTION UNTIL IT LOOKS LIKE THE PICTURE ABOVE.
RIGHT HAND & RIGHT HAND REVERSE MOUNTING - USE A SCREWDRIVER TO ROTATE THE CAM CLOCKWISE UNTIL IT
STOPS. ROTATE THE CAM BACK THE OTHER DIRECTION UNTIL IT LOOKS LIKE THE PICTURE ABOVE.
INSERT THE PACKAGED TAILPIECE INTO THE IC CORE CYLINDER. 2.
INSERT THE IC CORE CYLINDER INTO THE LOCKSET LEVER UNTIL IT SITS FLUSH. 3.
REMOVE THE CONTROL KEY 4.
3570/3573/3579 (UPDATED DESIGN) IC LEVERSET
3570/3579 (OLD DESIGN) IC LEVERSET
3570/3573/3579 IC LEVERSET TIMING INSTRUCTIONS
REV: 07 DRAWING NO: I-LS00310 SHEET 2 OF 2
HAGER COMPANIES
139 Victor Street, St. Louis, MO 63104 - [phone] - Fax [phone]