Specification Sheet

12/09/2009
The following products have been approved for statewide acceptance by the Florida Building Commission
pursuant to Rule 9B-72.090, F.A.C., for approval of products and systems for use on Exterior Swinging Door
Assemblies, in compliance with the structural requirements of the 2007 Florida Building Code. Verification of
Florida Statewide acceptance can be found at www.floridabuilding.org under the Product Approval section.
Severe Windstorm Resistant Components for Swinging Door Assemblies
ANSI A250.13 - 2003 Standard
Certified
Hardware
Assembly
Configuration
Door Size
Door Stiffness
Class
Design Load
Florida Certification
Number (FL#)
3100 Series
Grade 1 Deadbolt
Single - Out Swing
3-0 x 7-0
-
1150 lbf (100 psf)*
6118
Single - Out Swing
4-0 x 8-0
-
1150 lbf (70 psf)*
3200 Series
Grade 2 Deadbolt
Single - Out Swing
3-0 x 7-0
-
1150 lbf (100 psf)*
6118
Single - Out Swing
4-0 x 8-0
-
1150 lbf (70 psf)*
3400 Series
Grade 1 Lockset
Single - Out Swing
3-0 x 7-0
-
1150 lbf (100 psf)*
6118
Single - Out Swing
4-0 x 8-0
-
1150 lbf (70 psf)*
3500 Series
Grade 2 Lockset
Single - Out Swing
3-0 x 7-0
-
860 lbf (80 psf)*
7683
Single - Out Swing
4-0 x 8-0
-
860 lbf (50 psf)*
3800 Series
Grade 1 Mortise
Single - Out Swing
3-0 x 7-0
-
1150 lbf (100 psf)*
12932
Single - Out Swing
4-0 x 8-0
-
1150 lbf (70 psf)*
4500 Rim Exit
Device
Single - Out Swing
4-0 x 8-0 max.
I
+/- 70 psf
350 ft-lbs Impact
9481
4500 SVR Exit
Device
Out Swing
8-0 x 8-0 pair
max.
I
+/- 50 psf
350 ft-lbs Impact
13178
4700 Rim Exit
Device
Single - Out Swing
4-0 x 8-0 max.
I
+/- 40 psf
350 ft-lbs Impact
8293
780-112 Roton
Hinge
Single Swing
4-0 x 8-0 max.
I
1150 lbf (72 psf)*
350 ft-lbs Impact
6118
BB1191 Hinge
Single - Out Swing
-
-
1780 lbf**
6118
* Load in parenthesis indicates the equivalent load in pounds per square foot based on indicated door size and door stiffness (if applicable). This load is based on the hardware item
taking half of the force applied to the door assembly by the wind load and the hinges taking the other half.
** This load indicates the design load for a single butt hinge. Maximum wind load should be calculated based on door size, number of hinges used, and the other available door
hardware on the door assembly.