Specification Sheet

Hager Companies, Inc
139 Victor Street
Saint Louis, MO 63104
HAGER TEST REPORT NO.: LS04013
EVALUATION OF
Hager Companies
3400 Series Grade 1 Knob Lockset
TEST PARAMETERS:
This report covers tests and/or evaluations performed using the following standard(s) as a guideline:
ANSI/BHMA A156.2-2003 American National Standard for Bored and Preassembled Locks & Latches.
Testing was conducted by Intertek Testing Services NA, Inc., at their Middleton, WI facility.
DESCRIPTION OF TEST SAMPLES:
Samples were identified as Model 3400 Grade 1 Cylindrical Knob Lockset.
Samples were received in good condition on 06/01/2004.
TEST DATES: 6/04/2004 – 6/29/2004
RESULTS: COMPLIANT
The testing results of specific subsections are summarized below.
Subsection Test Description Test Results
9 Operational Tests Compliant
10 Strength Tests Compliant
11 Cycle Tests Compliant
12 Performance after Cycle Tests Compliant
13 Material Evaluation Tests Compliant
This report summary was prepared as an account of work performed by a Third-Party Nationally Recognized Testing Laboratory. The information included in this report is certified
extracts from the original test records, as contained in the permanent records of Hager Companies, Inc. Copies of the original third-party test reports are available upon request.
Report Date: 7/06/2004 Third Part Test Report: 3060216-003a
Copyright © 2006 Hager Companies, Inc. Test Lab: Intertek Testing Services