Installation Sheet

3200 Series ANSI Grade 2 Deadbolt
Installation Instructions
Meets ANSI 156.5
I-LS00764
REV 2 Page 2 of 2
5. INSTALL SINGLE CYLINDER (SKIP TO STEP 6 IF USING DOUBLE CYLINDER)
A. Retract deadbolt to unlock position. Insert exterior tail piece
horizontally through latch crank.
6. INSTALL DOUBLE CYLINDER
A. Retract deadbolt to unlock position. Insert exterior tail
piece horizontally through latch crank.
B. Press exterior cylinder flush against door. Install inside thumb
turn unit and tighten mounting screws.
B. Press exterior cylinder flush against door. Install
interior tail piece vertically through latch crank. Press
interior cylinder flush against door and tighten mounting
screws.
EXTERIOR CYLINDER
EXTERIOR TAILPIECE
LATCH CRANK
DEADBOLT
EXTERIOR CYLINDER
INSIDE THUMB
TURN UNIT
MOUNTING
SCREWS
EXTERIOR CYLINDER
EXTERIOR TAILPIECE
LATCH CRANK
EXTERIOR TAILPIECE
DEADBOLT
MOUNTING SCREWS
EXTERIOR CYLINDER
EXTERIOR TAILPIECE
INTERIOR TAILPIECE
INTERIOR CYLINDER