Specification Sheet

For more inform at i on vi s i t For more inform at i on vi s i t www. h agerco.comwww. hagerco. com
30S
Square Corner - Beveled Push Plate
Options:
- May be ordered cut for cylinder (CFC) or engraved "PUSH"
PRODUCT SPECIFICATIONS
PRODUCT SPECIFICATIONS
GAUGE:
- .050" (1 mm)
MATERIALS:
- Aluminum, brass, bronze, stainless steel
FINISHES:
- US3, US4, US10, US10B, DBZ, US26, US26D, US28, US32, US32D
FASTENERS:
- Six (6) #6 x 5/8'' OPH Tapping Screws - countersunk
CERTIFICATION:
- Meets ANSI A156.6 for J301 push plate
EPD:
- Push Plates Environmental Product Declaration
PRODUCT SIZE OPTIONS
ITEM # SIZE (INCHES) SIZE (MM)
30S/A30S 3 x 12 76 x 305
30S/A30S 3-1/2 x 15 89 x 381
30S/A30S 4 x 16 102 x 406
30S/A30S 6 x 16 152 x 406
30S/A30S 8 x 16 203 x 406