Specification Sheet

HAGER RESERVES THE RIGHT TO MAKE
DESIGN CHANGES WITHOUT NOTICE. CALL
HAGER ENGINEERING AT 1-800-325-9995
FOR LATEST REVISION DATE OF TEMPLATE.
ALL NON-BRACKETED DIMENSIONS ARE IN INCHES, ALL BRACKETED DIMENSIONS ARE IN MILLIMETERS.
Machine Screw Size- 1/4-20 x 3/4" F.H.
Wood Screw Size- No. 14 x 1 1/4" F.H.
-DO NOT SCALE-
TEMPLATE HINGES
REINFORCING PIVOT
FULL SURFACE
'96
450
450
1/8 (3.18) INSET
3/16 (4.76)
---
HINGE SIZES
254
253
252
251
NUMBER
1 (25.40)
5/8 (15.88)
1/2 (12.70)
3/4 (19.05)
---
(88.90 x 88.90)
3 1/2 x 3 1/2
4 x 4
(101.60 x 101.60)
4 1/2 x 4
(114.30 x 101.60)
5 x 4
(127.00 x 101.60)
4 1/2 x 4 1/2
(114.30 x 114.30)
5 x 4 1/2
(127.00 x 114.30)
5 x 5
(127.00 x 127.00)
6 x 5
(152.40 x 127.00)
PIVOT CENTERLINE
---
---
6 1/4 (158.75)
1/2 1 3/4
1 3/4 1 3/4 1/2
(44.45)
(44.45) (44.45) (12.70)(12.70)
1 3/4 (44.45)
1 (25.40)
1/2 (12.70)
1 (25.40)
1/2 (12.70)
1 3/4 (44.45)
1/8 (3.18)
4 3/8 (111.14)
1 1/81 1/8 1 1/8
(28.58) (28.58) (28.58)
4 1/2 (114.30)
1/2
(12.70)
1/2
(12.70)
C
L
JAMB
DOOR
C
L
HINGE
A
PIVOT AND HINGE
KNUCKLE CENTERLINE
HAGER COMPANIES
139 VICTOR STREET
P.O. BOX 12300
ST. LOUIS, MISSOURI 63157-0300
Template No. T
Rev.
Template No. T
(A) DISTANCE TO
CATALOG
NOTE: Installation instructions on back.
®