Installation Sheet

1.62
41.2
DOOR
EDGE
WOOD DOOR - DRILL (2) 1/8"[3.2] DIAMETER PILOT HOLES 1" [25.4] DEEP IN THE FACE OF THE DOOR. 1.
METAL DOOR - DRILL (2) 11/64"[4.4] DIAMETER PILOT HOLES INTO THE FACE OF THE DOOR. TAP
HOLES USING 8-32 TAP.
INSERT MOUNTING PLATE THROUGH ROSE LINER SO THEY SIT FLUSH. 2.
WOOD DOOR - SCREW (2) #8 X 1-1/8" WOOD SCREWS INTO THE DOOR TO SECURE THE ROSE LINER 3.
AND MOUNTING PLATE.
METAL DOOR - SCREW (2) 8-32 x 1" MACHINE SCREWS INTO THE DOOR TO SECURE ROSE LINER AND
MOUNTING PLATE.
INSTALL ROSE OVER ROSE LINER. 4.
INSERT LEVER UNTIL IT SNAPS SECURELY IN PLACE. 5.
MOUNTING
PLATE
ROSE LINER
ROSE
LEVER
DIMENSIONS IN [ ] ARE IN MILLIMETERS
HAGER COMPANIES
139 Victor Street, St. Louis, MO 63104 - [phone] - Fax [phone]
2517 DUMMY INSTRUCTIONS
DIRECT DOOR MOUNTING
SHEET 1 OF 3 DRAWING NO: I-LS00890 REV: 01