Specification Sheet

Dimensional data not binding. We reserve the right to alter specifications without notice.
Dimensions in mm
Inches are approximate
www.hafele.com/us
FC 7.111
7
11/18
45
(1 3/4")
2
(1/16")
E
CF
DG
A
B
T
M
M
E
73
(2 7/8")
F
Dimensions
A B C D E
19 – 30
(3/4" – 1 3/16")
55 (2 3/16") 0 0 0
33 (1 5/16") 58 (2 5/16") 0 3 (1/8") 3 (1/8")
36 (1 7/16") 63 (2 1/2") 2 (1/16") 6 (1/4") 5 (3/16")
39 (1 9/16") 67 (2 5/8") 3 (1/8") 9 (3/8") 8 (5/16")
42 (1 5/8") 70 (2 3/4") 3 (1/8") 12 (1/2") 11 ( 7/16" )
45 (1 3/4") 75 (2 15/16") 5 (3/16") 15 (9/16") 14 (9/16")
48 (1 7/8") 79 (3 1/8") 6 (1/4") 18 (11/16") 17 (11/16 ")
50 (1 15/16") 83 (3 1/4") 7 (1/4") 21 (13/16") 19 (3/4")
Calulation for wood doors
For door
weight TH T E
25 kg (55 lbs.)
1250 – 1850
(4’ 1 3/16" – 6’ 3/16")
<650
(2’ 1 9/16")
<577
(1’ 10 11/16")
30 kg (66 lbs.)
1851 – 2300
(6’ 7/8" – 7’ 6 9/16")
<900
(2’ 11 7/16")
<827
(2’ 8 9/16")
40 kg (88 lbs.)
1851 – 2500
(6’ 7/8" – 8’ 2 7/16")
<900
(2’ 11 7/16")
<827
(2’ 8 9/16")
50 kg (110 lbs.)
2301 – 2850
(7’ 6 9/16" – 9’ 4 3/16")
<900
(2’ 11 7/16")
<827
(2’ 8 9/16")
Max. door handle height with adjoining cabinets
Door thickness Door handle height F
<19 (3/4") 13.5 (9/16")
<22 (7/8") 10 (3/8")
<25 (1") 5 (3/16")
<50 (1 15/16") 2 (1/16")
Connector connecting profile
Connecting profile for quick and easy installation of pivot sliding
doors that overlay the base panel and cabinet top panel (Vorfront):
> Join cabinet side panels/cabinets laterally
> Slide connecting profile into the running and guide
tracks from the front and secure with screws from above
> Height variations of the external side or cabinets are
compensated by the connector by up to ±1.5 mm
Note
The door handle height must be taken into consideration if the doors
of adjoining cabinets coincide when one door is opened.
We recommend mounting flush pull handles.
Kitchen cabinet constructions with and without
fixed continuous base
The same connecting profile is used at top and bottom for
constructions with base cabinet feet.
A 26 mm (1") connecting profile is used for cabinets that are mounted
on a fixed continuous base..
Gap width F
Dimensions
F G
2 (1/16") 29.5 (1 3/16")
3 (1/8") 28.5 (1 1/8")
4 (5/32") 27.5 (1 1/16")
5 (3/16") 26.5 (1 1/16")
Rabbet dimension
The rabbet allows the use of
wood doors with
thickness of >30 – 50 mm
(>1 3/16" – 1 15/16").
T = TB – M + 73 mm (2 7/8”)
E = T – 73 mm (2 7/8”)
TH = door height
M = door handle width
E = max. push-in depth measured
from the inner side of closed door
T = max. distance for mounting the
fitting measured from the inner side
of closed door to rear edge of fitting.
For deeper furniture cabinets: Install fitting at dim. T measured from
the inner side of closed door.
Connector width 55 mm:
Recess for 1 pivot sliding door,
door thickness
19 – 30 mm (3/4" – 1 3/6")
Connector width 110 mm:
Recess for 2 pivot sliding doors,
door thickness
19 – 28 mm (3/4" – 1 1/8")
Construction with
base cabinet feet
Profile at top and bottom:
Connector width 110 mm
(4 5/16"), length 650 (2’ 1 9/16")
or 900 mm (2’ 11 7/16")
Construction with a
continuous fixed base
Profile at top:
Connector width 110 mm
(4 5/16"), length 650 (2’ 1 9/16")
or 900 mm (2’ 11 7/16")
Profile at bottom:
Connector width 110 mm
(4 5/16"), length 26 mm (1")
Installation
Installation dimensions
Sliding and Roller Shutter Systems
Pivoting Pocket Doors
HAWA Concepta 25/30/40/50