Installation Sheet

HAWA-Accessoires

2 Product information

Intended use

Connector 55 mm / 110 mm are used exclusively with HAWA-Concepta.

Intended place of use

Dry internal areas and internal areas where condensation can occur: for instance in kitchens or bathrooms, but without any

significant occurrence of chloride.

Tecnical data - Connector 55 mm (2 ") a pivot/slide-in door

Certificates are available for downloading at www.hawa.ch.

Tecnical Data - Connector 110 mm (4 ") for two pivot/slide-in doors

Certificates are available for downloading at www.hawa.ch.

Article number

Articles are identified by a 5-digit number.

General notes

The document «Safety Notes» (22991) is an integral part of these planning and assembly instructions.

The operating instructions, the planning and assembly instructions and the document «Safety Notes» (22991) must be handed over to

the end user of powered systems.

Metric measurements apply - those in inches are for information only.

Retain the instructions. Replacements available from www.hawa.ch.

Risk and residual risk

The hardware does not pose a risk or residual risk.

Disposal

Materials, accessories and packaging should be recycled in an environmentally friendly manner.

Door thickness wood 19 - 30 mm ( "-1 ")

The Connector 55 mm (2 ") compensates external side or cabinet body height differences of +/- 1,5 mm (+/- ").

Door thickness wood 19 - 28 mm ( "-1 ")

The Connector 110 mm (4 ") compensates cabinet body height differences of +/- 1,5 mm (+/- ").

The guide rollers do not generally leave any permanent marks on the visible sides of the door with the exception of sensitive

surfaces such as softwood.

This document demonstrates the intended use based on the example of HAWA-Concepta 50 wood.

-----