Catalog

Dimensional data not binding. We reserve the right to alter specifications without notice.
Dimensions in mm
Inches are approximate
www.hafele.com/us
FC 7.104
7
Hinge
Cable
Pivot Roller
Backset=
Door thickness
+1 (1/32”)
Hinge
Mounting Plate
Cabinet
Door
Typical Installation
X
Y
T
11 deep
(7/16")
8
(5/16")
46
(1 13/16")
Ø
35
(1 3/8")
35 mm - Inlay Door Accessory Pack
For door thickness 16 – 19 mm (5/8" – 3/4")
Item No.
self-closing 408.24.020
free-swinging 408.24.050
Supplied With
Mounting instructions
4 020.05.211 – M4 x 5 mm – Hinge plate mounting screws
4 015.55.639 – 3.5 x 15 mm – Hinge mounting screws
2 418.09.300 – Pivot roller
2 015.31.675 – Pivot roller mounting screw
10 013.03.304 – Slide mounting screws
2 329.31.502 – 94º, 35 mm cup hinge, self-closing, or
2 329.31.002 – 94º, 35 mm cup hinge, free swinging
2 329.71.503 – Clip mounting plate, with single
screw adjustment
X
Y
T
46
(1 13/16")
14
(9/16")
13 deep
(1/2")
Ø
40
(1 9/16")
40 mm - Inlay Door Accessory Pack
For door thickness 19 – 32 mm (3/4" – 1 1/4")
Item No.
self-closing 408.24.002
free-swinging 408.24.004
Supplied With
Mounting instructions
4 020.05.211 – M4 x 5 mm – Hinge plate mounting screws
4 015.55.639 – 3.5 x 15 mm – Hinge mounting screws
2 418.09.300 – Pivot roller
2 015.31.675 – Pivot roller mounting screw
10 013.03.304 – Slide mounting screws
2 329.05.632 – 94º, 40 mm cup hinge, self-closing, or
2 329.04.635 – 94º, 40 mm cup hinge, free swinging
2 329.71.500 – Clip mounting plate, with single
screw adjustment
X
Y
T
46
(1 13/16")
14
(9/16")
13 deep
(1/2")
Ø
40
(1 9/16")
40 mm - Overlay Door Accessory Pack
For door thickness 19 – 22 mm (3/4" – 7/8")
Maximum overlay: 7 mm (1/4")
Item No.
40 8. 24.011
Supplied With
Mounting instructions
4 020.05.211 – M4 x 5 mm – Hinge plate mounting screws
4 015.55.639 – 3.5 x 15 mm – Hinge mounting screws
2 418.09.300 – Pivot roller
2 015.31.675 – Pivot roller mounting screw
10 013.03.304 – Slide mounting screws
2 329.05.614 – 94º, 40 mm cup hinge, self-closing
2 329.71.500 – Clip mounting plate, with single
screw adjustment
Note
When using free swinging hinges it is recommended to use catches.
T X Y
1 16 – 19 (5/8" – 3/4") 45 (1 3/4") T + 1 (1/32")
2 19 – 32 (3/4" – 1 1/4") 64 (2 1/2") T + 1 (1/32")
3 19 – 22 (3/4" – 7/8") 50 (2") 1 (1/32")
XL Slide
Sliding and Roller Shutter Systems
Pivoting Pocket Doors