Safety data sheet

ManualsBrandsHACKER ManualsModel Making RechargeablesScale model rechargeable battery pack (LiPo) 18.5 V 3800 mAh 20 C EC3

MATERIAL SAFETY DATA SHEET

Product Name :

Hacker TopFuel LiPo Battery

Battery Type :

Rechargeable Battery

Description :

Lithium Cobalt Dioxide Chemistry or

Lithium Cobalt Manganese Nickel Oxide

Model :

SKPB Series

Electrochemical System :

Negative Electrode : Carbon

Positive Electrode : Lithium Cobalt Dioxide (LiCoO

)

Lithium Cobalt Manganese Nickel Oxide

(LiMnNiCoO

)

Electrolyte : Solution of lithium hexafluorophosphate

(LiPF

) in a mixture of organic solvent _

Ethylene Carbonate(EC) +

Ethymethyl Carbonate(EMC)

Nominal Voltage : 3.7V

Overall Chemical Reaction :

C + Li

1-x

C + LiCoO

C + Li

1-x

C + LiMnNiCoO

Emergency Telephone

Number :

International :

+49-871-953628-0

Technical Contact

Telephone Number :

+49-871-953628-0

Date Prepared :

2009-5-16

Date Reviewed :

2009-5-16

Revision No :

1.1

Revision Date :

2013-10-28

Hacker Motor GmbH

Schinderstrassl 32

Tel.: 0049 (0) 871-953628-0

Fax.:0049 (0) 871-953628-29

D-84030 Ergolding

Ref-Nr.:TF-SKPB-10200730-1-1

Section 1.Chemical Product And Company ldentification

Summary of content (8 pages)

PAGE 1
Hacker Motor GmbH Schinderstrassl 32 Tel.: 0049 (0) 871-953628-0 Fax.:0049 (0) 871-953628-29 D-84030 Ergolding Ref-Nr.:TF-SKPB-10200730-1-1 MATERIAL SAFETY DATA SHEET Section 1.
PAGE 2
Section 2.Composition/information on ingredients Chemical Name Lithium CAS # ,Cobalt ACGIH TLV Percent of Content 0.02mg/m as Co 3 Dioxide(LiCoO2) Lithium Cobalt 473894-38-1 Manganese 182442-95-1 0.2mg/m as Mn 3 20-50 0.
PAGE 3
As per directive 67/548/EEC Substance Melting Point Boiling Point Classification LiCoO2 LiMnNiCoO2 >1000℃ N/A 0.1mg/m3 as Co 1.0mg/m3 as Ni OSHA EC : 96-49-1 EMC : 623-53-0 Organic Solvents (EC-EMC) EC：38℃ EMC : 4℃ EC : 243℃ EMC : 90℃ None established OSHA 21324-40-3 LiPF6 N/A (decompose s at 160℃) N/A None established OSHA CAS No.
PAGE 4
combustible electrolyte fumes in case of exposure above 70℃ resulting from inappropriate use or the environment. Cells or batteries may flame or leak potentially hazardous organic vapors if exposed to excessive heat or fire. Fire, excessive heat, or over voltage conditions may produce hazardous decomposition products. Damaged or opened cells or batteries can result in rapid heating and the release of flammable vapors.
PAGE 5
approved container (after cooling if necessary) and dispose in accordance with local regulations. Section 7. Handing and Storage The batteries should not be opened, destroyed nor incinerated since they may leak or rupture and release in the environment the ingredients they contain. Handling : Batteries are designed to be recharged. However, improperly charging a cell or battery may cause the cell or battery to flame. Use only approved chargers and Procedures.
PAGE 6
Section 9. Physical And Chemical Properties Temperature range : Continuous Occasional In storage +30°C max -20/+60°C During discharge -20/+60°C -20/+60°C During charge 0/+45°C 0/+45°C Section10. Stability And Reactivity Conditions to avoid : Heat above 60°C or incinerate. Deform, mutilate, crush, pierce, disassemble Short circuit Prolonged exposure to humid conditions.
PAGE 7
Section14.Transport Information United Nations: UN No.: 3480 Classification: No Individual Lithium-polymer cells and battery packs with respectively not more than 20Wh (Cell) and 100Wh (Battery) of watt-hours are not restricted for transport. (5.0 Ah of Nominal Capacity: 5.0Ah x 3.7V = 18.
PAGE 8
LITHIUM ION or LITHIUM POLYMER RECHARGEABLE BATTERIES INSIDE (No Lithium Metal) The package contains lithium ion or polymer cell or batteries. The package must be handled with care and that a flammability hazard exists if the package is damage. Special procedures should be followed in the event of the package is damaged. To include inspection and repacking, if necessary. For emergency information, call +49-871-953628-0 Section 15.