User Manual User Manual

Figure 2 Back overview

1 Power cord connector 5 Air purge fitting

2 Fuse holder 6 Recorder output jack for a chart

recorder (0 to 1 V output)

3 Power switch 7 Remote cable jack for flow valve

module connection to the automatic

flow cell (low pressure)

4 DB9 connector for RS232 cable 8 Lamp access cover

Product components

Refer to Figure 3 to make sure that all components have been received.

If any of these items are missing or damaged, contact the manufacturer

or a sales representative immediately.

Figure 3 Instrument components

1 2100AN turbidimeter 7 StablCal

Calibration kit

2 USEPA filter assembly 8 Gelex

secondary turbidity

standardization kit

3 455 nm filter assembly 9 Dust cover

4 Oiling cloth 10 Printer paper roll (2x)

5 Six 1" sample cells (30 mL) with

caps

11 Power cord

6 Silicone oil

Supplied with 4700100 only.

Do not remove the plastic wrapper from the paper rolls until the paper is

installed.

English