User Manual

33
Section 8 Replacement Parts and Accessories
8.1 Replacement Items
Description QTY Catalog Number
Lamp Assembly each 18950-00
Instruction Manual, 1720E Turbidimeter System, English each 60100-18
8.2 Optional Accessories
Description QTY Catalog Number
Cable, sensor extension, 7.7 m (25 ft) each 57960-00
Cap, Connector Receptacle each 52100-00
Deionized (demineralized) water 1 L 272-56
Drain plug for the 1720E body each 44116-00
Filter, 0.45 µm, to produce ultra-filtered water for cleaning and calibration each 26705-00
Filter, 0.2 µm, to produce ultra-filtered water for calibration standard preparation each 23238-10
Formazin Calibration Kit includes: Calibration Cylinder, TenSette
®
Pipet, 4000 NTU
Formazin Primary Standard (500 mL)
each 44156-00
Floor Stand each 57432-00
Flow meter, 500–700 mL/min each 40282-00
ICE-PIC Module for Calibration and Calibration Verification, 20 NTU each 52250-00
ICE-PIC Module for Calibration and Calibration Verification, 1 NTU each 52215-00
Lid, Bubble Trap, 1720E each 52012-00
LonWorks Card each 59200-02
Photocell Replacement Kit for the 1720E each 52180-00
Pipet tips for 19700-01 TenSette Pipet 50/pkg 21856-96
Pipet tips for 19700-10 TenSette Pipet 50/pkg 21997-96
StablCal Calibration Set for the 1720 Series Turbidimeter
Includes: StablCal Standards, < 0.1 NTU, 20.0 NTU 1 L/each 26596-00
StablCal Standard, 0.1 NTU 1 L 27233-53
StablCal Standard, 0.3 NTU 1 L 26979-53
StablCal Standard, 0.5 NTU 1 L 26980-53
StablCal Standard, 1.0 NTU 1 L 26598-53
Strain relief, Heyco each 16664
Swabs, Cotton, presterilized for cleaning the photodetector 100/pkg 25543-00
TenSette Pipet, 0.1 to 1.0 mL each 19700-01
TenSette Pipet, 1.0 to 10.0 mL each 19700-10
Tubing, Inlet, ¼-inch OD, Polyethylene per foot 51322-00
Tubing, Outlet, ½-inch ID, ¾ inch OD, Tygon R3603 per foot 51263-00