DERWENT BEDSIDE TABLE Assembly Instructions - Please keep for future reference DERW-BT-SS20-A Dimensions Width - 50cm Depth - 40cm Height - 62cm 3M Tools required Important – Please read these instructions before assembly If you need help or have damaged or missing parts, email: customerservices@habitat.co.
Check you have all the components and tools listed on the front cover and page 3. Assemble the item as close to its final position (in the same room) as possible. Remove all fittings from the plastic bags and separate them into their groups. 1 2 1 Assembly requires at least 2 people Always lift and move. From time to time check that there are no loose fittings. Tighten as necessary. Dust regularly with a clean dry cloth.
Components and Fittings If you need help or have damaged or missing parts, email: customerservices@habitat.co.
Assembly Instructions Assembly Instructions Please keep safe for future reference Before assembling the furniture please identify all component parts. It would be sensible to assemble the furniture as close to its final position as possible. Do not place furniture directly in front of radiators, fires or any source of heat. Ensure the surface on which you are assembling the furniture is flat and clear of anything that might scratch it.
Assembly Instructions Step3: B 2 B X14 3 5
Assembly Instructions Step4: 1 8 X5 A 3 Step5: 5 7 6 A X2 3 6
Assembly Instructions Step6: 1 4 6 3 Step7: 2 7 6 4 7
Assembly Instructions Step8: 2 A B X7 Step9: Take care when standing product upright 8
Assembly Instructions Step10: B 9 B X4 Step11: 12 10 C Step12: C C X2 Step13: 12 13 12 10 10 9 9 A X4 9
Assembly Instructions Step14: 11 D 12 10 D X4 Step15: WARNING! In order to prevent overturning this product must be used with the wall attachment device provided. Serious or fatal crushing injuries can occur from furniture tipping over. To help prevent topple over :-Use the wall attachment devices provided -Never allow children to climb or hang on drawers -Do not overload the drawer beyond maximum recommended loading. -Place heaviest items in the lower drawers or shelves.
Assembly Instructions Step16 : Step17 : Step18: Attaching the bracket to the wall F 11
A Guide to - Wall Mounting & Fixings Important: When drilling into walls always Important note: Wall Fixings: check that there are no hidden wires or pipes etc. Make sure that the screws and wall plugs being used are suitable for supporting your unit. Consult a qualified tradesperson if you are unsure. Hints: - because of the variety of different wall types, Habitat cannot provide you with the exact fixings you will need to fix this product to the wall.
