Assembly Instructions

ManualsBrandsHabitat ManualsFitted wardrobesHolsted Grey Medium Shelf Pack

Bergen SHELF PACK 150 x 200 x 53cm

Dimensions

Width - 72.7cm

Depth - 48.8cm

Height - 1.8cm

Assembly Instructions- Please keep for future reference 247/3532

DR8250330

Issue 3 - 05/11/15

Important – Please read these instructions fully before starting assembly

Alternatively, call the Spares Helpline on: 0370 112 1928

For any other queries please contact the Customer Helpline on: 0345 640 2020

If you need help or have damaged or missing parts, please visit: www.argos-support.co.uk

or email: Help@ClickSpares.co.uk (quoting your original order number)

Summary of content (6 pages)

PAGE 1
DR8250330 Bergen SHELF PACK 150 x 200 x 53cm Assembly Instructions- Please keep for future reference 247/3532 Dimensions Width - 72.7cm Depth - 48.8cm Height - 1.8cm Important – Please read these instructions fully before starting assembly If you need help or have damaged or missing parts, please visit: www.argos-support.co.uk or email: Help@ClickSpares.co.
PAGE 2
Safety and Care Advice Important – Please read these instructions fully before starting assembly • Check you have all the components and tools listed on the following pages. plastic bags and separate them into their groups. • During assembly do not stand or put weight on the product, this could cause damage. • Assemble the item as close room) as possible. • Keep children and animals away from the work area, small parts could choke if swallowed.
PAGE 3
Components - Panels For damaged or missing parts, please visit: www.argos-support.co.uk or email: Help@ClickSpares.co.uk Please check you have all the panels listed below 1 Horizontal 2 Shelf x 2 (72.7 x 48.8cm) (72.7 x 48.8cm) P1895 P1894 Components - Fittings Please check you have all the fittings listed below Note: The quantiti es below are the correct amount to complete the assembly.
PAGE 4
Assembly Instructions Step 1 Insert the fittings a: a: change the place of one hanging-rail as shown. b: Insert 6 small locking screws A as shown.
PAGE 5
Assembly Instructions Step 2 Inserting Horizontal a: Push Cam Expando a: B housing B into the hole of the Horizontal 1. B B B B B 1 B 1 b: Turn Horizontal 1 and lower it onto the small locking screws A. b: 1 c: Tighten the Cams B with a Philips screwdriver.
PAGE 6
Assembly Instructions a: Step 3 inserting shelves a: Push shelf supports C in hole as shown. C b: 2 C D b: Position shelves 2 onto shelf supports C and fix by screwing eight chipboardscrews D through shelf supports C into shelves 2.