Assembly Instructions

Please check you have all the fi ttings listed below
7x34mm for ø5 Minifi x bolt x22
A
Note: The quantities below are the correct amount to complete the assembly. In some cases more fi ttings
may be supplied than are required.
ø15x9.5mm Minifi x cam x22
B
E
C
D
Components - Fittings
F
1.6x16mm Nail square x48
No. 4022-004
i
K
H
M N
3.5x35mm Chipboard screw x11
J
G
8x30mm Dowel x26 3.5x15mm Chipboard screw x14
Ø26 mm Cup hinge x6
Mounting plate x6
310x27x10mm Drawer slide x4
Overbalance protector x2
Hanging rail fi tting x2
No. 3901-35035
No. 3930-08030 No. 3901-35015
No. 4015-007 No. 4015-008
No. 4010-027
No. 41-00179
No. 4038-003-2
L
Tools required
Phillips
screwdriver
(medium)
Allen key
4mm incl.
Flatblade
screwdriver
(medium)
Small
hammer
Ruler/tape
measure
Eye protection
(when using a
hammer or glue)
No. 4033-004
P
O
R
3.0x12mm Chipboard screw x2
No. 3901-30012
ø4.2x9.5mm Euro screw x8
ø5.8x8mm Euro screw x12
35x40mm Mending plate x1
No. 3907-42010
No. 3907-58008
No. 4008-113
44x23x23 Angle x2
No. 4008-112
Q
ø27x24mm Knob + M4 screws x6
No. 4001-034
S
ø9.5/M4x9mm Machine screw x4
No. 3912-04009
4
No. 3933-15010
No. 4020-007
4.0x30mm Chipboard screw x20
No. 3903-40030