Brooklyn Wardrobe White Assembly Instructions - Please keep for future reference 8106951 Dimensions Length - 86cm Depth - 55,0cm Height - 170,1cm Weight - 54,1kg Important – Please read these instructions fully before starting assembly If you need help or have damaged or missing parts, call the Customer Helpline: 0045 7668 8055 or e-mail: order@flexa.
Safety and Care Advice Important – Please read these instructions fully before starting assembly • Check you have all the components and tools listed on pages 2 and 3. • Do not stand or put weight on the product, this could cause damage. • Remove all fittings from the plastic bags and separate them into their groups. • Assemble the item as close to its final position (in the same room) as possible. • During assembly children should be kept away from the product due to possible risk of injury.
Components - Parts If you have damaged or missing components, call the Customer Helpline: 0045 7668 8055 Please check you have all the parts listed below 1 4 7 Top x1 (86.0x55.0x1.6cm) No. 4301-1608602-40 List x1 (74.8x2.5x1.5cm) No. 12-01507483-20 Cross rail x1 (74.8x6.5x1.5cm) No. 12-01507482 10 Drawer base x2 (72.8x34.8x0.3cm) No. 4309-0307281 2 5 Leg x4 (168.5x4.0x2.6cm) No. 12-02616851-20 3 Base x1 6 (74.8x52.7x1.6cm) No. 4301-1607484-40 Plinth Straight x1 (74.8x5.0x1.5cm) No.
Components - Parts If you have damaged or missing components, call the Customer Helpline: 0045 7668 8055 Please check you have all the parts listed below 13 Door x2 14 Back panel x1 15 Side panel Right x1 16 Side panel Left x1 (114.1x37x1.6cm) No. 4301-1611411-40 (162.5x51.1x1.2cm) No. 4301-1216253-40 3 (119.8x77.2x0.3cm) No. 4309-0311981 (162.5x51.1x1.2cm) No.
Components - Fittings Please check you have all the fittings listed below Note: The quantities below are the correct amount to complete the assembly. In some cases more fittings may be supplied than are required. No. 3933-15010 No. 4020-007 A 7x34mm for ø5 Minifix bolt x22 C ø15x9.5mm Minifix cam x22 4.0x30mm Chipboard screw x20 No. 3901-30012 No. 41-00179 E D 3.0x12mm Chipboard screw x2 ø4.2x9.5mm Euro screw x8 No. 3907-58008 No. 4008-112 L K 3.5x35mm Chipboard screw x11 No.
Assembly Instructions Step 1 Insert the dowels G to the holes in base 5 and into the holes in cross rail 7 . A G G G It may be necessary to tap the dowels in very gently with a small hammer. G A A 5 Attach minifix bolts A to top panel 1 . G A A G G 1 A G A 7 G Step 2 Attach the side panels 15 and 16 to the legs 2 using screws C . C C Make sure the top of the side panel is flush with the legs and there are no gaps between the side panel and the edge of the groove in the legs.
Assembly Instructions Step 3 Insert the dowels G to the holes in the side panels 15 and 16 . Attach minifix bolts A to the side panels 15 and 16 . A D N O G L Front edge G G G Attach the hanging rail fittings N to the side panels 9 and 10 with screws D . G G Attach the hinge mounting plates O to the side panels 15 and 16 . G N D D N O O Attach the drawer runners R to the side panels 15 and 16 with euro screws L .
Assembly Instructions Step 4 Attach the base 5 to the side panels 15 and 16 with the minifix cams B . B Attach the cross rail 7 to the side panels 15 and 16 with the minifix cams B . 15 B B B 5 7 B 16 B B Step 5 i K Attach angles to the plinth 3 using screws i . Attach plinth 3 to side panels 15 and 16 using screws i .
Assembly Instructions Step 6 Attach the top 1 to the side panels 15 and 16 with the minifix cams B . B 1 B B B Step 7 Attach mending plate P to the list 4 using screws H . B H P H 4 P Step 8 Fasten the list 4 to the top panel using screws J , placing the screws into the marking holes in top 1 . J J 4 J J Don’t overtighten. Note that the mending plate must face inwards.
Assembly Instructions Step 9 F 28 14 Attach the back panel with nails F to the back side of the wardrobe. Nail the back panel 14 to the carcass, ensuring that there are NO GAPS between the top 1 and the back panel 14 . Follow the measurements. mm F 28 mm 14 28 28 mm mm Step 10 Attach the hinges M to both doors 13 using screws H .
Assembly Instructions Step 11 A G Insert the dowels into the holes in the drawer sides 11 and 12 . G 11 Attach the minifix bolts A to the drawer front 9 . A A Repeat for all drawer sides and drawer fronts. G 12 G A 9 A Step 12 Attach the drawer sides 11 and 12 to the drawer front 9 with the minifix cams B . Q B Q Q Attach the knob Q to the drawer front 9 with the appropriate lenght screw provided with the knob. B 9 12 B Q B Repeat for both drawers.
Assembly Instructions Step 14 Measure out the positions for the wall attachment straps. Drill two holes spaced as illustrated with the appropriate size for the wall attachment fitting (see next step). E E 1 E Pull the two straps through the gaps in top plate 1 .Push the furniture against the wall and secure the strap under the top plate with washer and screw. ,5 cm 167 cm 60 Step 14b Different types of wall fittings. Contact your local DIY or hardware store for the wall plugs and screws.
Assembly Instructions Step 15 Place the hanging rail 6 into the hanging rail fittings N . S 6 Attach the doors with the hinges M to the mounting plates O . Attach the knob Q to the doors 13 with the appropriate lenght screw provided with the knob. 13 Place the assembled drawer between the drawer runners R . Attach the drawer sides 11 and 12 to the runners using the screws S . 13 Q Q Repeat for both drawers. Assembly is complete.
