Assembly Instructions

12 12
Assembly Instructions
6
Step 7
Fit the drawer sides
to the small drawer
fronts
Push the left drawer side
. and right drawer side
. down onto the back
of the small drawer
fronts and .
Turn the large locking
cam nuts clockwise to
the “2 o’clock” position
as far as they will go to
secure the panels.
Important: Make sure
there is no gap between
the fitted panels.
Step 8
8 9
Prepare 2 pairs of
drawer sides
a: Insert a large locking
cam nut into the left
drawer sides and the
right drawer sides .
Note: The arrow on the
locking cam nut must
point towards the
hole in the end of the
panel.
b: Push 1 of the quickfit
dowels as far as it will
go into the left drawer
side and the right
drawer side .
Note: Only the plastic
thread of the quickfit
dowel sticks out from the
panel.
A
11
12
B
11
12
8
B
11
12
9
Note: The small right drawer
front has a small identification
hole (see panels page).
9
a:
b:
B
A
x 2 x 2
11
12
B
B
x 2 x 2
11
12
A
A
11
11
B
Turn to “2 o’clock”
Edge Edge
Edge