Assembly Instructions

Assembly Instructions
17
Step 30
a:
Fit the overbalance
protector kit
a: Before fitting the
overbalance protector
kit, use a spirit level to
check the top of the unit
is level, front-to-back
and side-to-side in the 3
positions shown.
Use suitable packing
pieces (not supplied) to
make the unit level.
To prevent possible
overbalancing this unit
must be secured to a
suitable wall by fitting of
the overbalance
protector kit to the
unit, or an alternative
fixing method of your
choice.
Wall fixings are not
supplied as they will
need to suit the wall
type.
Note:
Take care when
drilling the wall that you
do not drill into any
pipes, wires etc.
If in doubt, consult an
expert.
O
CR
CR
CR
CR
CR
CR
CR
b:
O
Cut-out
in back panel
Back
Top
WARNING!
In order to prevent overturning
this product must be used with the
wall attachment device provided