Assembly Instructions

Step 25

Step 26

Fit the back

a: Square up the unit by

making sure that

measurement x to x

equals y to y.

b: Place the back

onto the unit.

Nail around the

outside edges of the

back .

The measurement from top corner X to bottom corner X must be

equal to the measurement from top corner Y to bottom corner Y

Fit the 6 plastic nails

Tap 2 plastic nails

into the bottom edge of

each of the sides and

. .

Tap a plastic nail into

the bottom edge of each

of the long rails

fitted at the bottom

of the unit.