Assembly Instructions

Step 14

Step 15

Fit the 3 backs

a: Square up the unit by

making sure that

measurement x to x

equals y to y.

b: Place the small back

. in the centre of the

unit and nail along the

top and bottom edges.

Place the 2 large backs

. onto the unit as

shown and nail

around the outside

edges.

Note: Nails should be

spaced about 150mm

apart.

The measurement from top corner X to bottom corner X must be

equal to the measurement from top corner Y to bottom corner Y

These gaps are for

cable management

Fit the 6 plastic nails

Tap 2 plastic nails

into the bottom edge of

each of the sides and

. .

Tap a plastic nail into

the bottom edge of each

of the long rails

fitted at the bottom

of the unit.