Assembly Instructions

Step 14

Step 15

Fit the back

a: Square up the unit by

making sure that

measurement x to x

equals y to y.

b: Place the back

onto the unit.

Nail around the

outside edges of the

back and into the

back edge of the right

divider , as shown.

Note: Nails should be

spaced about 150mm

apart.

The measurement from top corner X to bottom corner X must be

equal to the measurement from top corner Y to bottom corner Y

Warning: The

unit is heavy.

Lift with care.

Fit the 4 plastic nails

Tap 2 plastic nails

into the bottom edge of

each of the sides and

. .

Stand the unit up for

the next step.