Safety Instructions

ManualsBrandsHabitat Technologies ManualsElectronicsPTAC Coordinator

Table Of Contents

Safety Instructions

Please read these instructions carefully BEFORE INSTALLING and using

the HTZ-01 Wi-Fi Module. Keep this guide in a safe place for future

reference.

• Installation and repairs are to be performed by a qualified

contractor in strict accordance with the requirements of state

and local regulating agencies. In the absence of local

requirements, follow ANSI/NFPA 70, National Electric Code.

• The HTZ-01 Wi-Fi Module is powered by 12 VDC through the

RJ45 Connector from an HTM-01 Base Module. DO NOT

APPLY external power to this device.

• DO NOT expose the HTZ-01 Wi-Fi Module to water.

• DO NOT store the HTZ-01 Wi-Fi Module where temperatures

drop below -20°F (4°C) or exceed 122°F (60°C)

• DO NOT operate the HTZ-01 Wi-Fi Module in temperatures

below 32°F (0°C) or exceed 113°F (45°C)

• DO NOT use solvents or aggressive cleaning agents to clean

this device. A dry soft cloth is recommended.

What’s In The Box

HTZ-01 Wi-Fi Module

Connector Cable

Installation Guide

Double-sided

Mounting Adhesive

Installation

For best results, the HTZ-01 Wi-Fi Module is to be mounted in a convenient location on the exterior of

the HVAC equipment where there is no sheet metal between the Wi-Fi Module and the Wi-Fi router.

• Affix the device to a suitable location using the double-sided mounting adhesive provided. MAKE

SURE the Connector Cable will easily reach from the HTM-01 Base Module to the HTZ-01 Wi-Fi

Module.

• Remove the protective label from both modules and connect them together using the Connector

Cable with RJ45 Connectors on each end.

• Once power is supplied to the HTZ-01 Module from the Base Module, follow the application

guide (www.habitattechnologies.com/downloads) to setup the Wi-Fi network.

Indicator No Light Orange

Flashing

Orange

Red Green

Flashing

Green

Internet

Not

registered

Registered

but can’t

connect

Internet

connected

Wi-Fi

Not

connected

to Wi-Fi

Lost Wi-Fi

connection

Connected

to Wi-Fi

network

Joining Wi-

Fi network

ZigBee

No Zigbee

network

created

Waiting for

Zigbee

devices to

join

Exceeded

maximum

numbe of

devices

Zigbee

network

connected

Identifying

HC-QG-HTZ-01-202007 v1

HTZ-01 Wi-Fi Module

Installation Guide

System Overview

Summary of content (2 pages)

PAGE 1
Safety Instructions Please read these instructions carefully BEFORE INSTALLING and using the HTZ-01 Wi-Fi Module. Keep this guide in a safe place for future reference. • Installation and repairs are to be performed by a qualified contractor in strict accordance with the requirements of state and local regulating agencies. In the absence of local requirements, follow ANSI/NFPA 70, National Electric Code. • The HTZ-01 Wi-Fi Module is powered by 12 VDC through the RJ45 Connector from an HTM-01 Base Module.
PAGE 2
SPECIFICATIONS Controls LED Indications Operating Conditions Storage Conditions Power Input FCC and Industry Canada Pairing button Reset Button (Hidden) Internet Wi-Fi Zigbee 32 - 104°F (0 - 40°C) Max. RH 90% (non-condensing) -4 - 185°F (-20 - 85°C) Max. RH 90% (non-condensing) 12 VDC (Supplied from HTM-01 through the RJ-45 Connection) Radio Wi-Fi: 802.11b/g/n, 2.4GHz Zigbee: 802.15.4, 2.4 GHz Dimensions 3.86” x 3.66” x 0.98” 9.8 cm x 9.3 cm x 2.