Installation Instructions

18
Parameter Display Description
Temperature
Oset
Use the buttons to set the
temperature oset between the room
sensor reading and display/set point
temperature. This is to eliminate a
discrepancy between the sensor reading
and actual temperature if it exists. Press
“Fan” to accept and go to the next
parameter.
Range -6°F to 6°F (-3°C to 3°C)
Increment 0.5°F (0.25°C)
Freeze
Protection
Use the buttons to
set the room temperature at which a heat
demand will be activated to prevent
freezing. Press “Fan” to accept and go to
the next parameter.
Range 41°F to 63°F (5°C to 17°C); --
Increment 1°F (0.5°C)