STEAM SYSTEM II Multi-Function Sanitizing Steam Cleaner MS-30 Clean and sanitize nearly every surface in your home with the awesome power of steam! User Manual
Copyright ©2010 HAAN® Corporation Notice The information contained in this document is subject to change without notice. HAAN® Corporation assumes no responsibility for any errors that may appear in this document nor does it make expressed or implied warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose.
In troduction Clean and sanitize nearly every surface in your home with the awesome power of steam! Congratulations on purchasing the HAAN® MS-30 STEAM SYSTEM II Multi-Function STEAM SYSTEM II. From the house to the garage, the Steam System II brings you an easy way to steam clean your hard surface floors, as well as dozens of other surfaces, including all the nooks and crannies throughout your home. The STEAM SYSTEM II uses steam to remove tough grease, dirt and grime.
Important Safe ty Infor ma t ion ! IMPORTANT i Be sure to read ALL instructions and warnings before using your HAAN STEAM SYSTEM II. ! Warning Risk of electrical shock be sure to read and follow all instructions and warnings. i ! CAUTION The MS-30 emits steam at 212˚F to sanitize the area of use. This means that the steam head, UltraMicroFiber Pads and attachments get very hot during use.
Imp ortant Sa fety Info r ma t ion ! Warning To avoid circuit overload, DO NOT operate another appliance on the same electrical outlet (circuit). i ! CAUTION DO NOT operate your STEAM SYSTEM II if the power indicator light flickers. Contact the HAAN® Customer Care Center at the number shown below. i 16. Do not immerse in water or any other liquids. 17. Do not use for any purpose other than described in this User Manual.
Produc t De scription 6 MS-30 7 STEAM SYSTEM II 8 Multi-Function Sanitizing Steam Cleaner 9 11 4 IN ➟ 10 13 ➟ 4 2 3 1 15 5 12 14 pg 4 8 7 7 - HA A N D I R EC T / 8 7 7 -4 2 2 -6 3 4 7 w w w.h aan u s a.
Produc t De scription Features: HELPFUL HAAN® HINT: 12 Powerful Steam Jets are spaced perfectly to cover more floor in less time. Be assured you are steam cleaning when you push the machine forward, as well as when you are pulling it back. HELPFUL HAAN® HINT: To extend the life of your Ultra-MicroFiber Pads, always place your unit on the floor protector/resting pad while the unit heats up, and attach the UltraMicroFiber pad when the unit is ready to use. 1.
Produc t De scription Items packaged in storage compartment of canister: 3, 4, 5, 6, 7 Connection 3 PUSH Button MS-30 STEAM SYSTEM II 4 Deluxe Accessory Kit Items packaged in white accessory bag: 8, 9, 10, 11, 12, 13, 14 6 9 7 10 2 ➟ 5 8 1 Snap ON; Snap OFF 11 16 12 13 17 18 14 19 15 20 pg 6 8 7 7 - H A A N D I R E C T / 8 7 7 -4 2 2 -6 3 4 7 21 w w w.h aan u s a.
Produc t De scription The MS-30 STEAM SYSTEM II includes the Deluxe Accessory Kit. Make sure to check for all your accessories: 1. Extension Poles (2) - to attach individual accessories for special cleaning tasks or click together to create the perfect length for every steaming job. 2. Floor and Countertop Steam Head (1) - for cleaning hard-surface floors and other large surfaces. 3.
Assembling Your STEAM SYSTEM II To make sure you are completely satisfied with the operation of your MS-30 STEAM SYSTEM II, be sure to follow the assembly and operating instructions included in this manual. Read this manual thoroughly before assembling your unit. Pay specific attention to the product description and familiarize yourself with all the parts of your STEAM SYSTEM II. Locate and organize the parts of the unit before assembling. No additional tools are needed to put the unit together.
Before Using Your STEAM SYSTEM II i HELPFUL HAAN® HINT: Never leave the appliance in one spot on any surface for any period of time. Always place your STEAM SYSTEM II on the Floor Protector/ Resting Mat when stationary and make sure the STEAM SYSTEM II is turned off not in use. Be sure to read ALL instructions and warnings before using your HAAN® STEAM SYSTEM II. ! Warning Your STEAM SYSTEM II is designed to clean hard floor surfaces that will withstand high heat.
Using Your STEAM SYSTEM II Fig 1 Using the STEAM SYSTEM II to sanitize your floor: 1) a b c Fig 2 Fig 3 ➟ Opening to Tank ! IMPORTANT Always be sure that your STEAM SYSTEM II is UNPLUGGED from the wall receptacle prior to filling the water tank. i pg 10 Remove all parts from the packaging. 2) Assemble the unit as described on page 6, attaching both extension poles (a & b)and the Steam Head (c).(Fig 1) 3) Place the STEAM SYSTEM II canister on a flat, level surface.
Using Your STEAM SYSTEM II Using the STEAM SYSTEM II to sanitize your floor (cont): Fig 4 Fig 5 a Yes b NO! Fig 6 7) Plug the STEAM SYSTEM II into a convenient standard 120-volt grounded wall receptacle. 8) Press the ON/OFF button ( ) on the canister front to turn your STEAM SYSTEM II ON (it’s inside the inverted orange triangle). The GREEN Power ON light will illuminate as will the ORANGE Ready Light.
Using Your STEAM SYSTEM II Using the STEAM SYSTEM II to sanitize your floor (cont): ! CAUTION The MS-30 emits steam at 212˚F to sanitize the area of use. This means that the steam head, UltraMicroFiber Pads and attachments get very hot during use. Care should be taken when using this appliance and DO NOT touch them during use except in the approved manner as outlined in this manual. i p g 12 detach the pad from the Steam Head.
Using Your STEAM SYSTEM II Fig 8 Operating Instructions: (cont) Ultra-MicroFiber Pads What is an Ultra-MicroFiber? Fig 9 HELPFUL HAAN® HINT: We recommend placing your STEAM SYSTEM II on the Floor Protector/Resting Pad while the unit heats up. When the unit is ready, lift it off of the resting pad and simply place the Ultra-MicroFiber Pad on the floor. The ‘hook & loop’ system quickly attaches the pad to the base of the unit. Never leave the appliance in one spot on any surface for any period of time.
Using Your STEAM SYSTEM II How to Use the Ultra-MicroFiber Pads: (cont) HELPFUL HAAN® HINT: For optimal performance, the Ultra-MicroFiber™ pad should be changed after 10 minutes of use. Fig 11 Turn the MS-30 back ON, resting the Steam Head on the Floor Protector Resting Mat. After the unit has heated back up, place a dry Ultra-Microfiber Pad on the Steam Head (detailed on pg 9). Continue to sanitize your floor.
Using Your STEAM SYSTEM II Using the Attachments: (cont) Fig 14 Foot Tab Front Tabs Fig 15 Fig 16 ! CAUTION The MS-30 emits steam at 212˚F to sanitize the area of use. This means that the steam head, UltraMicroFiber Pads and attachments get very hot during use. Care should be taken when using this appliance and DO NOT touch them during use except in the approved manner as outlined in this manual. i w w w. haanus a. c om on pg 11-12, steps 11-13). Be careful not to over-fill the tank.
Using Your STEAM SYSTEM II Using the Attachments: (cont) Fig 17 Fig 18 Place the MS-30 on the Floor Protector Resting Mat, turn it OFF and wait until it cools down (approximately 5 minutes). Carefully remove the tray as described in Step 6 on the previous page (see Fig 16). Return the Steam Head to the Floor Protector Mat and turn the unit ON. Once the MS-30 is ready to use, place a dry Ultra-Microfiber Pad on the floor — hook & loop side up — and press the unit onto the pad.
Using Your STEAM SYSTEM II Fig 21 Fig 22 Fig 23 Fig 24 Fig 25 ww w. haanusa. c om over the button and onto the handle until the button pops into place (Fig 21). 4) The Multilayer Glass & Mirror Bonnet is used without the Ultra-Microfiber Pad. Be sure the unit is OFF, unplugged and cool. It attaches directly to the unit by slipping it onto the steam head. Match the shape of the pad to the steam head and expand the gathered edge of the pad.
Using Your STEAM SYSTEM II Using the Attachments: (cont) Fig 26 Using the STEAM SYSTEM II to clean and sanitize rough surfaces : (Tile, Grout & Rough Surface Brush) The Tile, Grout & Rough Surface Brush (Fig 26) slips onto the end of the extension poles to clean and sanitize tile, grout and other rough hard surfaces. 1) Fig 27 Orange PUSH button Fig 28 Orange PUSH button ridges Fig 29 ! CAUTION DO NOT overfill the water tank. Use only 1 cupful of the included Fill Cup when adding water to the tank.
Using Your STEAM SYSTEM II ! CAUTION The MS-30 emits steam at 212˚F to sanitize the area of use. This means that the steam head and any of the attachments get very hot during use. Care should be taken when using this appliance and DO NOT touch them during use except in the approved manner as outlined in this manual. i Fig 30 Fig 31 Connection PUSH Button ➟ Fig 32 Fig 33 w w w. haanusa.
Using Your STEAM SYSTEM II Fig 34 Using the Attachments: (cont) Specialized Brush and Nozzle Accessories: Fig 35 Fig 36 The specialized brush and nozzle accessories that come with the MS-30 use the Steam Jet Nozzle as the base that connects them to the handle with the Concentrator Nozzle locking them. After connecting the Steam Jet Nozzle as described on the previous page, you would attach the Concentrator Nozzle (which can be used alone or with other ends).
Using Your STEAM SYSTEM II Using the Attachments: (cont) Specialized Brush and Nozzle Accessories:(cont) Fig 37 Large Round Brush with Steel Wool: Fig 38 The Large Scrub Brush makes fast work of cleaning larger objects and surfaces. Everything the smaller brushes do is made easier on a larger scale.
Using Your STEAM SYSTEM II Using the Attachments: (cont) Fig 40 To attach and use accessories: (cont) ➟ Shaped Nozzle End Fig 41 6) Push the attachment of choice onto the end of the Concentrator Nozzle until it is firmly attached. It will be a tight fit. The end of the nozzle is shaped to fit the interior of each attachment snuggly and you can change their position around the nozzle to reach exactly the spot you need to focus the steam (Fig 40).
Using Your STEAM SYSTEM II Using the Attachments: (cont) Fig 43 To attach and use accessories: (cont) SqueeGee Attachment: Attach the Squeegee Attachment to the end of the Garment/Flat Surface Attachment to steam clean and sanitize glass and mirrored surfaces. (Fig 43).
Care & Maintenance ! IMPORTANT • Turn your STEAM SYSTEM II off and unplug the unit from the electrical outlet. Allow it to cool Always be sure that your STEAM completely before preparing to store it away. SYSTEM II is UNPLUGGED from • Prepare to store the STEAM SYSTEM II by winding the wall receptacle prior to the cord up and placing it in the compartment for cleaning or before emptying that purpose found at the rear of the Canister the water tank. (Fig 47).
Helpful Hints Be sure to always vacuum or sweep up loose dirt before steam cleaning your floors. The MS-30 does not have any suction power. The easiest way to use the MS-30 is to tile the handle to a 45° angle and push and pull the unit slowly across each section of your floor – approximately 2 to 3 yards at a time. A good amount of steam passes through the Ultra-MicroFiber pad. We recommend that the Ultra-MicroFiber pad be changed when it gets too wet; these need to be replaced as necessary.
Questions About the STEAM SYSTEM II ? Question: Can the HAAN® STEAM SYSTEM II be used on laminate flooring? The HAAN® STEAM SYSTEM II was designed for use on sensitive flooring like laminates. We’ve spent years optimizing the steam emission so that at nearly half the wattage of competitive products (ours is only 1300w versus most that are 1500w), we still emit steam at 212˚F. This means our finer vapor-like steam is gentler than those that simply blast 1500w of water and steam onto your floor.
Questions About the STEAM SYSTEM II ? Question: Why does the unit stop steaming when the red refill light comes on? When the red refill light comes on, the unit automatically shuts off as a safety feature. ? Question: When I first used my MS-30, the pads left water streaks on my floor – why? It is likely you attached your Ultra-MicroFiber Pad to the bottom of the MS-30 before the unit was heated causing the pad to become wet.
Questions About the STEAM SYSTEM II ? Question: I don’t see much steam coming out of the HAAN® MS-30 Steam Cleaning STEAM SYSTEM II – why not? Actually, you shouldn’t be able to see that much steam coming out of the MS-30. The truth is, the more steam you see when in use the less effective a STEAM SYSTEM II is, because the steam should be physically directed to cleaning your floors (or other hard surfaces), and not escaping through other parts of the steamer.
Questions About the STEAM SYSTEM II ? (cont) Question: How do I use the Sanitizing Tray for my carpet? The Sanitizing Tray is to be used without the Ultra-MicroFiber Pad and can be attached directly to the Steam Head. See directions for attaching it and using it on pg 14-15. ? Question: Do I have to use distilled water in my HAAN® STEAM SYSTEM II? We recommend distilled water, but you may use tap water, unless you have hard water in your area. Using hard water will shorten the life of your appliance.
Troubleshooting This chapter summarizes the most common problems you could encounter with your STEAM SYSTEM II. Please read the different sections for more details. If you are unable to solve the problem, please contact our Customer Care Representatives at the number shown below. PROBLEM: After heating up, it is normal to hear a vibration sound from the water pump inside the main unit. It normally will stop when the air inside has been pumped out.
Troubleshooting (cont) After the unit has cooled down, refill the tank with cold water, using a little less than indicated by the line on the fill cup. Plug the unit back into the wall receptacle and press the yellow power button to start sanitizing. PROBLEM: Water is leaking from the STEAM SYSTEM II. Possible Cause: 1) Your unit’s water tank is overfilled.
Warranty One-Year Limited Warranty Your HAAN® STEAM SYSTEM II is warranted to be free from defects in material and workmanship for a period of one (1) year from the date of purchase when utilized for normal household use by the original purchaser only. The included Warranty Registration Card must be filled out and returned within 10 days of purchase. This is essential for your warranty to be effective should any problem arise with this product.
Specifications Product Specifications: Model MS-30 Color Dove Grey & Tangerine Size (base): 10″h x 13″w x 9″d Weight 8 lbs Voltage/Hz 120 volts / 60 Hz Wattage 1300 watts Cord Length Tank Capacity 12’ 900 ml/30 fluid ounces Heat-up time Operating Time 3 minutes 30 minutes before refill is needed *Dimensions approximated. Dimensions include base and measured without hose, steam head or attachments. w w w. haanus a.
Don’t miss out on all the benefits that come with registration. Go to www.HAAN USA.com /register, call or mail this completed form today. Product Registration Last Name Please fill out and mail this Product Registration Card within ten (10) days of purchase. In order to validate the foresaid Limited Warranty. The registration will allow us to contact you in the unlikely event of a product safety notification.
Place Stamp Here Product Registration HAAN® Corporation 1866 Colonial Village Lane Lancaster, PA 17601 5) 4) 3) We like to hear from our product ownerrs.
HAAN® Corporation 1866 Colonial Village Lane Lancaster, PA 17601 www.haanusa.
