Professional Sanitizing GARMENT STEAMER With Complete Accessory Package GS-30 For Dry-Cleaner-Fresh Clothes Without the Dry Cleaner! User Manual
Copyright ©2009 HAAN® Corporation Notice The information contained in this document is subject to change without notice. HAAN® Corporation assumes no responsibility for any errors that may appear in this document nor does it make expressed or implied warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose.
In t r o d u c t io n Remove wrinkles and sanitize fabrics throughout your home. Congratulations on purchasing the HAAN® GS-30 Professional Sanitizing Garment Steamer. Now you have an easy way to quickly steam away wrinkles and freshen and sanitize fabrics throughout your home. Heating up in seconds, the GS-30 is ready when you are – for fast touch-ups of your favorite blouses, shirts and suits, without the hassle of an iron or the fear of scorching.
! Im p o r t a n t S a f e t y I nf o r m a t i o n IMPORTANT i FOR HOUSEHOLD USE ONLY When using your garment steamer, basic safety precautions should always be observed, including the following: Be sure to read ALL instructions and warnings before using your HAAN® Floor Sanitizer. WARNING – To reduce the risk of fire, electric shock or injury: 1. Do not leave the product unattended with the power turned on.
Im p o r t a n t S a f e t y I n f o r m a t i o n ( con t) 16. Never put any aromatic oils or perfumes, chemicals, alcohol or detergent products into the steam cleaner, except those approved by HAAN®. Non-approved additives may damage the unit or make it unsafe for use. 17. To refill the product with water during use, follow Warning the directions on pg 11-12. Unplug the product before attempting to add water. 18. The product and accessories become hot during use.
Im p o r t ant S a f e t y I nf o r m a t i on ( con t) IMPORTANT ! Warning DO NOT modify the plug. Improper connection of the equipment-grounding conductor can result in a risk of electrical shock. i ! Grounding Instructions: The HAAN® GS-30 must be connected to a grounded (3-prong) wiring system. Grounding provides a safe path of least resistance for electrical current, in the event the unit should malfunction or break down, thereby reducing the risk of electrical shock.
! Before Using Your Garment Steamer i Be sure to read ALL instructions and warnings before using your HAAN® Garment Steamer. ! HELPFUL HAAN® HINT: Never rest the Steam Head Wand anywhere except in the Steam Head Cradle found at the top of the collapsible hanger. Warning Your Garment Steamer is designed to steam fabric surfaces that will withstand high heat. Do not use on unsealed wood or unglazed ceramic floors.
P r o d u c t D e s c r i pt i o n Professional Sanitizng GS-30 Garment steamer With Complete Accessory Package 2 1 Steam Wand 3 4 6 Open 5 Closed 7 8 11 14 Valve 12 14 9 10 15 13 16 pg 6 8 7 7 - H A A N D I R E C T / 8 7 7 -4 2 2 -6 3 4 7 w w w.HAANUS A.
Product Description ( co nt) Feature Identification: 1. Steam Wand with Steam Head - features 9 powerful steam jets which gently emit the perfect amount of steam to freshen and de-wrinkle fabrics throughout your home. 2. Wand Cradle - the prongs on the top of the hanger serve as a rest for the Steam Wand between uses. 3. Collapsible Hanger - allows you to perfectly steam your favorite blouses and other clothing items. 4.
Product Description ( c o nt) Make sure to check for the following accessories! 17 18 19 17. Crease Tool (1) - attach to the Steam Wand for perfect creases or crisp shirt cuffs and collars. 18. Crease Clip (1) -use to hold items in place for creasing slacks or longer items. 19. Lint Remover (1) - attach to the Steam Wand to remove dust, lint or hair on clothing or upholstery. 20 20. Upholstery/Fur Brush (1) -attach to the Steam Wand for freshening upholstery, pillows and other fabric items.
Assembling Your HAAN® Garment Steamer the hanger assembly to the top of the pole and 3 Insert press down until it is stable. The crossbar on the hanger 3 locks into place at the center. Screw the lock tight against the center pole. Unscrew and lower sides for storage. ➟ the widest end of the 2 Insert telescoping pole into the base ➟ Threaded Base Ring of the unit, aligning threads in the base ring and turn the base ring until tightened and flush with the base.
Adjusting Your Deluxe Garment Valet Open Closed Wand Cradle — The prongs on the top of the hanger serve as a rest for the Steam Wand between uses. ➟ Crossbar — The Crossbar twists from vertical to horizontal with ease. Grasp the center pivot, pull and twist so the matching pieces snap into place. ➟ Pole Locks — Loosen the telescoping pole locks and adjust the pole to the height best suited to your needs.
Using Your Garment Steamer CAUTION The GS-30 emits steam at 212°F to sanitize the area of use. This means that the Steam Wand and attachments get very hot during use. Care should be taken when using this appliance and DO NOT touch items during use except in the approved manner as outlined in this manual. i ! CAUTION Use a grounded receptacle. Use only a heavy duty extension cord rated for 15 amps minimum – DO NOT use an ordinary extension cord.
Using Your Garment Steamer Operating Instructions: Fig 3 Water Release Prong Fig 4 a) b) Fig 5 Fig 6 Fig 7 Water Refill Light ON Power Light (cont) 5) Align the cap and screw it on securely. Be sure to get it tight.To avoid any leakage or dripping, we recommend that you carry it back to the base with the cap up rather than by the handle. 6) Hold the Reservoir Tank over the recess in the base and turn it over so the cap is now facing down.
Using Your Garment Steamer Operating Instructions: 12) Fig 8 Excess Water Removal Valve Fig 9 (cont) When you have finished using the Garment Steamer, turn the Power Button to the OFF position and unplug the unit. If you will not be using the unit again soon, be sure to drain all the remaining water from the Reservoir Tank and also the internal tank by opening the Excess Water Removal Valve (Fig 8) and emptying the excess.
Using Your Garment Steamer Fig 12 Operating Instructions: (cont) Lint/Hair Removal Brush Attachment: Fig 13 • Attach the Lint/Hair Removal Brush to the steam head to remove dust or lint on clothing or upholstery. Match the shape of the attachment to the steam head and press the attachment firmly to the steam head until the tabs on the top and the bottom of the brush snap securely into place.
Using Your Garment Steamer Operating Instructions: (cont) Fig 18 MicroFiber Cleaning Socks: • These form-fitted socks fit over the steam head for cleaning glass and counter tops. Slip it over the steam head to sanitize and wipe away residue. (Fig 18) Helpful Hints: Fig 19 • Sanitize Baby’s Room: The GS-30 Professional Sanitizing Garment Steamer is great for keeping baby’s crib sheets, mattress, toys and other fabric surfaces clean and germ free.
Care & Maintenance ! Mineral Deposits: IMPORTANT Always be sure that your Garment Steamer is UNPLUGGED from the wall receptacle prior to cleaning or before emptying the water tank. i ! One problem with a steamer appliance is the mineral deposits caused by the high mineral content in many municipal water supplies. Mineral residue inside of the internal pipes and heater can cause intermittent steaming or, in some cases, no steam at all.
Care & Maintenance (cont) Fig 23 Water Refill cap Handle Fig 24 Excess Water Removal Valve Fig 25 Be sure to turn the Power Button to the OFF position and unplug the unit. Drain all the remaining water from the orange removable Reservoir Tank by unscrewing the Water Refill Cap on the underside of the tank and emptying any excess water.
Troubleshooting This chapter summarizes the most common problems you could encounter with your HAAN® Garment Steamer. Please read the different sections for more details. If you are unable to solve the problem, or have any questions not answered in this manual please contact a Customer Care Representative at 877-HAAN DIRECT (877-422-6347). PROBLEM: Garment Steamer does not operate. Possible Cause: 1) Power cord not firmly plugged into outlet. 2) No power in wall outlet.
Troubleshooting (cont.) PROBLEM: Power light is not illuminated and unit does not seem to be making steam. Possible Cause: 1) Power cord not firmly plugged into outlet. 2) No power in wall outlet. Possible 1) 2) 3) www. HAAN U S A . c om Solution: Check the outlet to see if power supply is normal. Check plug in outlet and set plug firmly. Check fuse or breaker. Replace fuse and/or reset breaker.
Frequently Asked Questions ? Question: Does the GS-30 HAAN® Garment Steamer actually iron or press clothing? The GS-30 Garment Steamer doesn’t press clothing, but rather, relaxes wrinkles. However, by using the hand pressing board, you will be able to steam garments flat or crisp. ? Question: Does the HAAN® Garment Steamer kill germs? Yes, the 212°F steam kills up to 99.9% of E.Coli, Salmonella and other commmon Household germs – to leave fabrics fresh and clean.
Frequently Asked Questions ? Question: Do I have to empty the tank completely after I am done using the Garment Steamer? We recommend emptying the water from the tank if you are not going to use the unit again soon and are storing it away. Directions for doing this are described on pg 17. ? Question: Do the accessories lock into place, or do I have to worry about them coming off while I am steaming? The accessories snap firmly onto tabs found on the steam head.
Specifications Product Specifications: Model GS-30 Color Dove Gray & Tangerine with Black Trim Size: Canister & Garment Valet 63.5″h x 10.4″w x 14.9″d (fully extended) Weight 7.7 lbs Voltage/Hz 12 volts / 60 Hz Wattage 1500 watts Cord Length 12' Tank Capacity ½ gallon (2000 ml ) Heat-up time Operating Time 30-40 seconds 60 minutes before refill is needed *Dimensions approximated. Dimensions include base and measured without hose, steam head or attachments.
Warranty One-Year Limited Warranty Your HAAN® Garment Steamer is warranted to be free from defects in material and workmanship for a period of one (1) year from the date of purchase when utilized for normal household use by the original purchaser only. The included Warranty Registration Card must be filled out and returned within 10 days of purchase. This is essential for your warranty to be effective should any problem arise with this product.
Don’t miss out on all the benefits that come with registration. Go to www.HAANUSA.com /register, call or mail this completed form today. Product Registration Last Name Please fill out and mail this Product Registration Card within ten (10) days of purchase. In order to validate the aforesaid Limited Warranty. The registration will allow us to contact you in the unlikely event of a product safety notification.
Place Stamp Here ® Product Registration HAAN® Corporation 1866 Colonial Village Lane Lancaster, PA 17601 5) 4) 3) We like to hear from our users.
HAAN® Corporation 1866 Colonial Village Lane Lancaster, PA 17601 www.HAANUSA.
