Product Card
Table Of Contents
English
9
Ge Started
1. Charge the Tablet
The Tablet comes with a built-in rechargeable lithium-polymer baery. It is recommended to fully charge
the baery for at least 4 hours before rst use.
To charge the Tablet, plug the charger to an electrical socket with the other end of the adapter
inserted to the charging slot on the Tablet (efer to Step 1 on the previous page).
You may connue to use the Tablet while it is charging. You may stop charging any me even when
it is not 100% charged.
The baery charge status will be indicated in the middle of the screen.
Disconnect the power adapter when the Tablet is fully charged aer 4 hours.
If the tablet does not power up aer charging, please insert a paper clip pin inside the eset hole on
the back and recharge the tablet again.
Note: When the Tablet is connected to a computer via the USB cable, the baery will charge via the USB
socket, but at a much slower rate than via the DC 5V power adapter.
Do not use any other power adapters than the one supplied. Using an incompable power adapter
could damage the tablet and poses the potenal risk of re.
Touch Screen
You can control all the of the Tablet by using the touch screen with the
three touch keys located at the of the screen. To control the Tablet, use your to select
the icons, buons, menu, on-screen keyboard, and other items displayed on the screen.
You can perform the following with your
Touch an to select it
“Touch and drag” to move items or to scroll through lists by
touching and holding, then gliding your over the screen.
Use a and thumb to “pinch zoom” on-screen items such as
photographs and web pages.
2. Turn on the Tablet
• Press the power key for 5 seconds.
The Frunsi logo will show up in the middle of the screen, followed by the Android logo.
Wait for about 30-60 seconds for Android system to load.
You will then see the welcome page.