User's Manual

3
1.3 Buttons and Connections
1.4 Charging the Tablet
The Tablet comes with a built-in rechargeable lithium-polymer
battery. It is recommended to fully charge the battery before
first use.
Charge the Battery
 Connect the power adapter to an electrical socket.
 Insert the DC jack end to the power slot on the Tablet.
 Disconnect the power adapter when the Tablet is fully
charged.
 If the Tablet is powered off, it will charge until the battery is
full.
 If the Tablet is powered on, the battery charge status will
be indicated on the screen by the battery meter.
 When the Tablet is connected to a computer via the USB
cable, the battery will charge via the USB socket, but at a
much slower rate than via the DC 5V power adapter.
Do not use any other power adapters than the one
supplied. Using an incompatible power adapter could
damage the Tablet and poses the potential risk of fire.
1.5 Memory Expansion with Micro SDHC Memory Card
Your tablet features a 8 GB built-in flash memory, which can be
expanded using a Micro SD card (not included). You may use
any Micro SD or Micro SDHC card, up to 32GB capacity.
To use the memory card as media storage, transfer media files
(videos, music and photos) from your computer to your micro