User's Manual

BlueHDP+USB
User Guide
Release r01 www.stollmann.de Page 8 of 14
3.3 Procedure of Installation
To operate with BlueHDP+USB and CESL binary software please install the
following software:
- BlueHDP+USB with Silabs USB to UART Bridge CP210x
- CESL binary setup v1.5 or later
After correct installation of BlueHDP+USB with Silabs USB to UART Bridge CP210x
please install the CESL binary software and follow the instructions.
3.4 Using the CESL Manager with BlueHDP+USB
Start the “Continua Manager GUI” application and modify the following parameters
in the “Edit” section:
- “Transport Settings” --> disable USB & TCP Transport
- “Transport Settings” --> enable Bluetooth Transport with according
COM-Port of BlueHDP+USB
- “WAN” --> disable Delivery to WAN Bridge
Now press “Start Transport” (1) to initialize the connected BlueHDP+USB and push
“Discover” (2) to start the device discovery of HDP Bluetooth devices in your area.